Schneider Electric BSH1002M12A2A
MPNBSH1002M12A2A
Active
servo motor BSH, Lexium 05, 5.5N.m, 1500rpm, 100mm, keyed shaft, Sincos multi turn, without brake, IP50
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | Without |
| Parameter | Value |
|---|---|
| Nominal torque | 4.96 N.m for LXM05AD14N4, 380...480 V, three phase 4.96 N.m for LXM05BD14N4, 380...480 V, three phase 4.96 N.m for LXM05CD14N4, 380...480 V, three phase |
| Nominal output power | 780 W for LXM05AD14N4, 380...480 V, three phase 780 W for LXM05BD14N4, 380...480 V, three phase 780 W for LXM05CD14N4, 380...480 V, three phase |
| Nominal speed | 1500 rpm for LXM05AD14N4, 380...480 V, three phase 1500 rpm for LXM05BD14N4, 380...480 V, three phase 1500 rpm for LXM05CD14N4, 380...480 V, three phase |
| Maximum mechanical speed | 6000 rpm |
| Continuous stall torque | 5.5 N.m for LXM05AD14N4, 380...480 V, three phase 5.5 N.m for LXM05BD14N4, 380...480 V, three phase 5.5 N.m for LXM05CD14N4, 380...480 V, three phase |
| Peak stall torque | 13.3 N.m for LXM05AD14N4, 380...480 V, three phase 13.3 N.m for LXM05BD14N4, 380...480 V, three phase 13.3 N.m for LXM05CD14N4, 380...480 V, three phase |
| Rotor inertia | 2.31 kg.cm² |
| Parameter | Value |
|---|---|
| Network phases | 3 |
| Maximum current (Irms) | 9 A for LXM05AD14N4 9 A for LXM05BD14N4 9 A for LXM05CD14N4 |
| Continuous stall current | 2.5 A |
| Maximum permanent current | 9 A |
| Torque constant | 2.32 N.m/A at 120 °C |
| Back-EMF constant | 146 V/krpm at 120 °C |
| Number of motor poles | 8 |
| Stator resistance | 8.6 Ohm at 20 °C |
| Stator inductance | 45.7 mH at 20 °C |
| Stator electrical time constant | 5.31 ms at 20 °C |
| Electrical connection | Rotatable right-angled connectors |
| Parameter | Value |
|---|---|
| Feedback type | Multiturn SinCos Hiperface |
| Speed feedback resolution | 131072 points/turn x 4096 turns |
| Parameter | Value |
|---|---|
| Shaft end style | Keyed |
| Shaft diameter | 19 mm |
| Shaft length | 40 mm |
| Second shaft end | Without second shaft end |
| Key width | 30 mm |
| Motor flange size | 100 mm |
| Mounting support | International standard flange |
| Length | 204.5 mm |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 9 mm |
| Mounting-hole bolt circle diameter | 115 mm |
| Centring collar diameter | 95 mm |
| Centring collar depth | 3.5 mm |
| Maximum radial force (Fr) | 620 N at 4000 rpm 690 N at 3000 rpm 790 N at 2000 rpm 990 N at 1000 rpm |
| Maximum axial force (Fa) | 0.2 x Fr |
| Parameter | Value |
|---|---|
| IP degree of protection | IP50 standard |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 120 °C |
MPN
BSH1002M12A2A