The CAD32AFC7 is a TeSys Deca control relay from Schneider Electric's TeSys range, built for switching control circuits in motor starter and industrial panel applications. It carries a 127 V AC standard coil and a 3 NO + 2 NC pole contact arrangement, so it can handle both normally-open and normally-closed logic in the same package — useful when you need to interlock a contactor and signal a PLC off the same relay. Rated for utilisation categories AC-15, AC-14, and DC-13 per EN/IEC 60947-5-1, meaning it's certified for switching electromagnetic loads (contactors, solenoid valves) and resistive/inductive control circuits.
Depth of 93 mm leaves room behind the panel door for wiring ducts. IP2X on the front face (per VDE 0106) means finger-safe from the panel front — no extra cover needed for routine access. Operating temperature spans -40 to 60 °C, with derating allowed up to 70 °C if the enclosure has some airflow. Compliance covers EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1 — so it's accepted in North American, European, Chinese, and Japanese panels without a separate approval hunt. Protective treatment TH per IEC 60068 means it's handled tropical humidity in storage; not a field concern, but useful for QA traceability.