The TeSys CAD32AML is a Deca-series control relay — 3 normally-open and 2 normally-closed poles in a 45 mm wide package. It's built for control circuits on machinery, conveyors, and pump panels where you need to switch pilot devices, contactor coils, or indicator loads. The 220 V DC low-consumption coil keeps heat down in a crowded enclosure, and the snap-in terminals mean no lost hardware when you're swapping one out on a line-down call.
Rated for utilisation categories AC-15 (solenoid loads up to 690 V), AC-14 (pilot devices), and DC-13 (DC solenoids and contactor coils) — so it handles the inductive kick of a motor starter coil or a valve solenoid without welding contacts. The 3 NO + 2 NC contact arrangement gives you one spare NC for a safety feedback loop while still having three NOs for the main control circuit. Ambient operation from -40 to 60 °C, with derating allowed up to 70 °C — that covers a hot summer day inside a steel mill panel, though you'll want to check the thermal curve if the cabinet runs above 60.