It carries a 72 V DC standard coil and terminates via snap-in terminals, which means it clips directly onto a DIN rail in the panel without needing a separate base. The utilisation categories — AC-15, AC-14, and DC-13 — tell you what loads this relay can switch reliably. AC-15 covers solenoid valves and electromagnetic clutches above 72 VA; AC-14 covers small electromagnetic loads below 72 VA; DC-13 covers solenoids and contactors on DC control circuits. So if you are replacing a relay in a 24 VDC valve manifold or a 110 VAC contactor coil circuit, this part fits.
The CAD32ASD is a panel-mount control relay from the TeSys Deca range. Its 45 mm width and 107 mm height fit the standard DIN-rail footprint alongside contactors and overloads. The IP2X front-face protection (per VDE 0106) means the live terminals are finger-safe behind the panel door — no extra shrouding needed for routine access. Operating temperature spans -40 to 60 °C, with derating allowed up to 70 °C. Storage range is -60 to 80 °C. The TH protective treatment per IEC 60068 handles tropical humidity, so this relay is fine in unheated enclosures or coastal plants.
The CAD32ASD carries EN/IEC 60947-5-1, UL 60947-5-1, CSA C22.2 No 60947-5-1, GB/T 14048.5, and JIS C8201-5-1 approvals. That covers control-circuit devices for industrial use across North America, Europe, China, and Japan — no separate UL/CSA variant needed for a global machine build.