Schneider Electric TeSys B, CV1BL1L0ZM522, single-pole contactor, 1000 A AC-3 at 690 V, 220 V AC 50 Hz coil.
| Parameter | Value |
|---|---|
| Product / component type | Contactor |
| Series / range | TeSys |
| Application | Motor Resistive circuits, heating, lighting |
| Parameter | Value |
|---|---|
| Rated operational voltage (Ue) | 690 V AC |
| Utilisation category | AC-1 AC-3 |
| Parameter | Value |
|---|---|
| Pole configuration | 1P |
| Parameter | Value |
|---|---|
| Device short name | CV1BL |
| Control circuit type | AC |
| Pole contact composition | 1 NO |
| Coil voltage | 220 V AC 50 Hz |
| Auxiliary contact composition | 2 NO + 2 NC |
| [Ie] rated operational current | 1000 A AC for power circuit |
| Current rating code of contactor | BL |
The 220 V AC 50 Hz coil is standard for European control circuits.
The AC-1 and AC-3 utilisation categories cover both resistive loads (heating, lighting) and motor starting/running. The single NO main pole and the auxiliary contact block (2 NO + 2 NC) give you one switched power path plus four auxiliary signals for feedback or interlocking. The 220 V AC coil is specific to 50 Hz mains; verify your control voltage matches before panel integration.
Rated operational current is 1000 A in AC-3 duty at 690 V AC. The control circuit voltage is 220 V AC 50 Hz. It has one normally open main pole and an auxiliary contact block with 2 NO + 2 NC contacts.
The contactor is rated for AC-1 (resistive loads, heating, lighting) and AC-3 (squirrel-cage motor starting and switching off during running). The 1000 A AC-3 rating is the motor-duty figure that determines fit.
No related articles