Skip to main content
Log in
Schneider Electric EZCV250H44150 — Circuit Breaker Accessories

Schneider Electric EZCV250H44150 EasyPact EZCV250H 4P 150A M

MPNEZCV250H44150
Obsolete

Schneider Electric EasyPact EZCV250H, EZCV250H44150, 4P MCCB, 150 A thermal-magnetic trip, 100 kA Icu at 240 V AC, 25 kA at 440 V AC, IEC 60947-2.

Schneider Electric EZCV250H44150 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

EZCV250H44150 — Identification
ParameterValue
Product / component typeCircuit breaker
Range of productEasyPact
Device applicationDistribution
EZCV250H44150 — Electrical
ParameterValue
Network type (AC/DC)AC
Rated current [In]150 A at 40 °C
Rated operational voltage [Ue]440 V AC 50/60 Hz conforming to IEC 60947-2
Rated insulation voltage [Ui]440 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage [Uimp]6 kV conforming to IEC 60947-2
Network frequency50/60 Hz
Poles description4P
EZCV250H44150 — Protection & Performance
ParameterValue
Breaking capacity100 kA Icu at 220...240 V AC 50/60 Hz conforming to IEC 60947-2 25 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 36 kA Icu at 380...415 V AC 50/60 Hz conforming to IEC 60947-2
Rated service breaking capacity [Ics]12.5 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 18 kA at 380...415 V AC 50/60 Hz conforming to IEC 60947-2 50 kA at 220...240 V AC 50/60 Hz conforming to IEC 60947-2
Breaking capacity codeH
Trip unit technologyThermal-magnetic
Trip unit rating150 A at 40 °C
Trip unit nameTM-D
Protection typeEarth-leakage protection Short-circuit protection Overload protection
Earth-leakage protectionWith
Suitability for isolationYes conforming to IEC 60947-2
Utilisation categoryCategory A
Mechanical durability10000 cycles
Local signallingPositive contact indication
EZCV250H44150 — Mechanical
ParameterValue
Connection pitch35 mm
Downside connectionFront
Upside connectionFront
Device short nameEasypact EZCV250H
Control typeToggle
Mounting modeFixed
Mounting supportBackplate
Width140 mm
Height165 mm
Depth68 mm
EZCV250H44150 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to IEC 60529
IK degree of protectionIK07 conforming to EN 50102
Pollution degree3 conforming to IEC 60947
Operating ambient air temperature-25...70 °C
Storage ambient air temperature-35...85 °C
EZCV250H44150 — Approvals
ParameterValue
StandardsEN/IEC 60947-1 EN/IEC 60947-2 JIS C8201-2-2 GB/T 14048.2

Product details

The Schneider Electric EZCV250H44150 is a 4-pole EasyPact EZCV250H moulded-case circuit breaker (MCCB) rated 150 A at 40 °C, with a thermal-magnetic TM-D trip unit that provides overload, short-circuit, and earth-leakage protection in a single device. At 440 V AC the breaking capacity drops to 25 kA Icu, still adequate for typical 440 V line-side faults. The 4T protected poles cover all four poles with overload and short-circuit sensing; the neutral pole is unprotected.

It is rated IP20 (finger-safe) and IK07 (impact-resistant), so it suits installation inside a distribution enclosure where personnel do not contact live parts. Pollution degree 3 per IEC 60947 means it can operate in an industrial environment with conductive pollution.

Frequently asked questions

What are the key ratings of EZCV250H44150?

Rated current 150 A at 40 °C, breaking capacity 100 kA Icu at 220…240 V AC and 25 kA Icu at 440 V AC, 4 poles, thermal-magnetic TM-D trip unit with earth-leakage protection.

What standards does EZCV250H44150 comply with?

It complies with EN/IEC 60947-1, EN/IEC 60947-2, JIS C8201-2-2, and GB/T 14048.2. It is also suitable for isolation per IEC 60947-2.

Where can I buy EZCV250H44150?

This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

MPN
EZCV250H44150