Schneider FCE200519B200 Cable Assembly
MPNFCE200519B200
Active
FCE200519B200 by SQUARE D
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Encoder type | Absolute multiturn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor |
| Supply voltage | 400 V |
| Maximum current irms | 3.4 A LXM62 3.4 A LXM52 |
| Output current 3s peak | 3.4 A |
| Continuous stall current | 0.8 A |
| Maximum permanent current | 0.8 A |
| Continuous power | 840 W |
| Nominal output power | 840 W LXM62 840 W LXM52 |
| Switching frequency | 8 kHz |
| Number of motor poles | 3 |
All specifications
| Parameter | Value |
|---|---|
| Phases | Three phase |
| Network number of phases | 3 |
| IP degree of protection | IP69K motor: conforming to IEC 60034-5 IP67 motor: conforming to IEC 60034-5 |
| Mounting support | Flange |
| Mounting holes diameter | 0.2 in (5 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 2.3 in (58 mm) |
| Electrical connection | Cable with stripped end |
| Key width | 0 in (0 mm) |
| Centring collar depth | 0.08 in (2 mm) |
| Length | 8.9 in (225.1 mm) |
| Inertia | 0.0 kg.cm² of brake 0.13 kg.cm² of motor |
| Category | US1PC5218359 |
| Shaft end | Smooth shaft |
| Shaft length | 0.8 in (20 mm) |
| Holding brake | Without |
| Nominal speed | 4000 rpm |
| Rotor inertia | 0.13 kg.cm² |
| Holding torque | 5.75 lbf.in (0.65 N.m) |
| Nominal torque | 6.99 lbf.in (0.79 N.m) LXM62 400 V three phase 6.99 lbf.in (0.79 N.m) LXM52 400 V three phase |
| Shaft diameter | 0.4 in (11 mm) |
| Torque constant | 1.15 N.m/A |
| Sizing reference | SC005H1302 |
| Back emf constant | 1.15 V/krpm 68 °F (20 °C) |
| Device short name | SHS |
| Motor flange size | 2.3 in (58 mm) |
| Peak stall torque | 28.3 lbf.in (3.2 N.m) LXM62 800 mA, 400 V, 3 phase 28.3 lbf.in (3.2 N.m) LXM52 800 mA, 400 V, 3 phase |
| Stator inductance | 84.1 mH |
| Stator resistance | 37.1 Ohm |
| Maximum axial force fa | 40 N |
| Number of motor stacks | 3 |
| Temperature copper hot | 266 °F (130 °C) |
| Continuous stall torque | 8.0 lbf.in (0.9 N.m) LXM62 8.0 lbf.in (0.9 N.m) LXM52 |
| Maximum radial force fr | 240 N 4000 rpm |
| Centring collar diameter | 1.6 in (40 mm) |
| Maximum mechanical speed | 9000 rpm |
| Speed feedback resolution | 128 periods |
MPN
FCE200519B200