The Schneider Electric GoPact G12T4A80 is a fixed-mount 4-pole MCCB rated 80 A at 40 °C, with a thermal-magnetic TM-D trip unit providing LI protection — thermal for overload (L) and magnetic for short-circuit (I). The 10 kA breaking capacity at 380/415 V AC means it can safely interrupt fault currents up to that level without upstream damage, sized for distribution panels in commercial and light industrial buildings. The IP20 finger-safe enclosure suits backplate mounting inside a locked panel — not for wet or outdoor service without an outer cabinet.
Mounts flat on a backplate via screw terminals, with front-facing upside and downside connections. The 100 mm width, 130 mm height, and 60 mm depth fit standard distribution board cutouts. Neutral sits on the left, and the 25 mm connection pitch matches common busbar spacing.
Designed and tested to EN/IEC 60947-1, EN/IEC 60947-2, and EN/IEC 60947-2 Annex H, covering the main standard for low-voltage switchgear and controlgear. The suitability-for-isolation marking confirms it can be used as a disconnecting means per the same standard. Electrical durability is rated at 8,000 cycles at 415 V at rated current, mechanical durability at 30,000 cycles.