Skip to main content
Log in
Schneider Electric GC2502B5

Schneider GC2502B5 TeSys GC Contactor, 2 Poles, 2 NC, 24 VAC

MPNGC2502B5
Obsolete

Schneider GC2502B5 Tesys Gc, Gy, Gf — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$66.85Ref. price · indicative, final on quote
Schneider Electric GC2502B5 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GC2502B5 key specifications
ParameterValue
Control typeRemote control
Control circuit typeAC at 50 Hz
Product or component typeModular contactor
Coil voltage24 V AC 50 Hz
Voltage500 V conforming to IEC 61095 500 V conforming to VDE 0110
Control circuit voltage limitsDrop-out: 0.2...0.75 Uc at 50 Hz (at Operational: 0.85...1.1 Uc at 50 Hz (at <50 °C)
[Ue] rated operational voltage<= 250 V AC
[Uimp] rated impulse withstand voltage4 kV
[Icw] rated short-time withstand current200 A 40 °C - 10 s for power circuit 62 A 40 °C - 30 s for power circuit
Breaking capacity68 A at 400 V for power circuit conforming to IEC 61095
[Ie] rated operational current25 A AC-7A 8.5 A AC-7B
[Ith] conventional free air thermal current25 A (at 50 °C) for power circuit

All specifications

GC2502B5 additional specifications
ParameterValue
Inrush power in15 VA 50 Hz (at 20 °C)
Power dissipation per pole1.6 W
Power pole contact composition2 NC
Hold-in power consumption in3.8 VA 50 Hz (at 20 °C)
Poles description2P
Utilisation categoryAC-7A AC-7B
IP degree of protectionIP40 conforming to VDE 0106 (in enclosure) IP20 conforming to VDE 0106
Mounting modeClip-on
Mounting supportDIN rail
Connections - terminalsControl circuit: screw clamp terminals 1 cable(s) 2.5 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 2.5 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 2.5 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1.5 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1.5 mm²solid without cable end Power circuit: screw clamp terminals 1 cable(s) 6 mm²flexible without cable end Power circuit: screw clamp terminals 2 cable(s) 4 mm²flexible without cable end Power circuit: screw clamp terminals 1 cable(s) 6 mm²flexible with cable end Power circuit: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end Power circuit: screw clamp terminals 1 cable(s) 6 mm²solid without cable end Power circuit: screw clamp terminals 2 cable(s) 4 mm²solid without cable end
Operating altitude<= 3000 m
Depth62.5 mm
Width17.5 mm
ColorWhite
Height81 mm
Electrical durabilityAC-7A: 100000 cycles AC-7B: 100000 cycles
Mechanical durability1000000 cycles
StandardsIEC 61095 IEC 60947-5
RangeTeSys
Operating time10...25 ms opening 10...30 ms closing
Heat dissipation1.3 W at 50/60 Hz
Quantity per setSet of 12
Average impedance2.5 mOhm - Ith 25 A 50 Hz for power circuit
Device short nameGC25
Tightening torqueControl circuit: 0.8 N.m - on screw clamp terminals Power circuit: 0.8 N.m - on screw clamp terminals
Operating position30°/vertical
Protective treatmentTC
Contactor applicationMotor control Heating Lighting
Mechanical robustnessShocks contactor open: 10 Gn for 11 ms Shocks contactor closed: 15 Gn for 11 ms Vibrations contactor open: 2 Gn, 5...300 Hz Vibrations contactor closed: 3 Gn, 5...300 Hz
Associated fuse rating25 A gL at <= 440 V for power circuit
Maximum operating rate300 cyc/h 50 °C
Irms rated making capacity68 A at 400 V AC for power circuit conforming to IEC 61095
Total number of 18 mm modules1
Ambient air temperature for storage-40...70 °C
Ambient air temperature for operation-5...50 °C

Product details

Overview

The GC2502B5 is a Schneider TeSys GC contactor with 2 poles and a 2 NC power circuit, rated for 25 A switching current on a 24 VAC 50 Hz coil. It carries IEC 61095 and IEC 60947-5 approvals and is housed in an IP40 enclosure for clip-on DIN-rail mounting.

Applications

This contactor is suited for motor control, heating, and lighting applications in industrial and commercial panels. Typical installations include switching resistive and inductive loads in HVAC, conveyor systems, and lighting contactor banks where 2-pole normally-closed power circuits are required.

MPN
GC2502B5