Schneider TeSys GC contactor, order code GC2520M6, 2 poles, 2 NO power circuit, 25 A switching current, 240 V AC coil at 60 Hz, clip-on mount, IP40.
| Parameter | Value |
|---|---|
| Control type | Remote control |
| Control circuit type | AC at 60 Hz |
| Product or component type | Modular contactor |
| Coil voltage | 220...240 V AC 60 Hz |
| Voltage | 500 V conforming to IEC 61095 500 V conforming to VDE 0110 |
| Control circuit voltage limits | Drop-out: 0.2...0.75 Uc at 50 Hz (at Operational: 0.85...1.1 Uc at 50 Hz (at <50 °C) |
| [Ue] rated operational voltage | <= 250 V AC |
| [Uimp] rated impulse withstand voltage | 4 kV |
| [Icw] rated short-time withstand current | 200 A 40 °C - 10 s for power circuit 62 A 40 °C - 30 s for power circuit |
| Breaking capacity | 68 A at 400 V for power circuit conforming to IEC 61095 |
| [Ie] rated operational current | 25 A AC-7A 8.5 A AC-7B |
| [Ith] conventional free air thermal current | 25 A (at 50 °C) for power circuit |
| Parameter | Value |
|---|---|
| Inrush power in | 15 VA 50 Hz (at 20 °C) |
| Power dissipation per pole | 1.6 W |
| Power pole contact composition | 2 NO |
| Hold-in power consumption in | 3.8 VA 50 Hz (at 20 °C) |
| Poles description | 2P |
| Utilisation category | AC-7A AC-7B |
| IP degree of protection | IP40 conforming to VDE 0106 (in enclosure) IP20 conforming to VDE 0106 |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Connections - terminals | Control circuit: screw clamp terminals 1 cable(s) 2.5 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 2.5 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 2.5 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1.5 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1.5 mm²solid without cable end Power circuit: screw clamp terminals 1 cable(s) 6 mm²flexible without cable end Power circuit: screw clamp terminals 2 cable(s) 4 mm²flexible without cable end Power circuit: screw clamp terminals 1 cable(s) 6 mm²flexible with cable end Power circuit: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end Power circuit: screw clamp terminals 1 cable(s) 6 mm²solid without cable end Power circuit: screw clamp terminals 2 cable(s) 4 mm²solid without cable end |
| Operating altitude | <= 3000 m |
| Depth | 62.5 mm |
| Width | 17.5 mm |
| Color | White |
| Height | 81 mm |
| Electrical durability | AC-7A: 100000 cycles AC-7B: 100000 cycles |
| Mechanical durability | 1000000 cycles |
| Standards | IEC 60947-5 IEC 61095 |
| Range | TeSys |
| Operating time | 10...25 ms opening 10...30 ms closing |
| Heat dissipation | 1.3 W at 50/60 Hz |
| Quantity per set | Set of 12 |
| Average impedance | 2.5 mOhm - Ith 25 A 50 Hz for power circuit |
| Device short name | GC25 |
| Tightening torque | Control circuit: 0.8 N.m - on screw clamp terminals Power circuit: 0.8 N.m - on screw clamp terminals |
| Operating position | 30°/vertical |
| Protective treatment | TC |
| Contactor application | Lighting Heating Motor control |
| Mechanical robustness | Shocks contactor open: 10 Gn for 11 ms Shocks contactor closed: 15 Gn for 11 ms Vibrations contactor open: 2 Gn, 5...300 Hz Vibrations contactor closed: 3 Gn, 5...300 Hz |
| Associated fuse rating | 25 A gL at <= 440 V for power circuit |
| Maximum operating rate | 300 cyc/h 50 °C |
| Irms rated making capacity | 68 A at 400 V AC for power circuit conforming to IEC 61095 |
| Total number of 18 mm modules | 1 |
| Ambient air temperature for storage | -40...70 °C |
| Ambient air temperature for operation | -5...50 °C |
The GC2520M6 is a Schneider TeSys GC contactor with 2 poles and a 2 NO power circuit rated for 25 A switching current. The coil is 240 V AC at 60 Hz, and the device carries IEC 60947-5 and IEC 61095 certifications.
The 2-pole, 2 NO configuration suits single-phase loads or two-wire switching where a neutral pole is required.