The GS2AH107 is a direct frontal rotary handle from the TeSys GS range, designed for the GS 30A UL disconnect switch. It carries a switch rated current of 600 A / 800 A, meaning it can actuate a switch sized for motor or resistive loads up to that current range — the 800 A figure typically applies to AC-21A or AC-22A duty, while 600 A may be the AC-23A motor-switching limit. The handle is black, with two positions (O-I), and includes a padlocking provision for lockout/tagout compliance.
Deployment context and protection
The front-mount design means it bolts directly to the enclosure door, with the rotary shaft engaging the switch mechanism behind the panel. That's a standard arrangement for a disconnect handle: one person can align the shaft coupler, tighten the mounting nuts from the front, and verify the O-I detents before power is applied.
Listed to CSA and UL standards, so it carries the required North American safety certifications for a disconnect handle used in industrial control panels. The lifecycle status is active — this is not a phase-out or NRND part, which means you can spec it into a BOM without worrying about a last-time-buy window. No official successor exists because none is needed; the GS2AH107 is current production.