The GS2AH235 is an external rotary handle for the TeSys GS range of disconnect switches. It mounts on the right side of the enclosure and provides two handle positions — O (off) and I (on) — with padlocking capability in the O position. The handle is rated for use with GS disconnects covering 100 A through 400 A IEC, so one handle SKU covers the full line from a 100 A feeder disconnect up to a 400 A main isolator. IP55 protection means the handle assembly withstands water jets and dust ingress — suitable for panel exteriors in washdown areas or outdoor enclosures where the operator needs to break the circuit without opening the door.
The 100–400 A IEC current range covers the GS2AH family of disconnects. The handle itself does not carry a current rating — it is the mechanical operator for the switch mechanism inside the enclosure. The 100–400 A figure tells you which TeSys GS disconnect bodies this handle interfaces with. If your BOM specifies a GS disconnect in that range, this handle is the matching operator. Padlocking in the O position (lockable in off) meets lockout/tagout requirements for safe maintenance access. The grey front plate and black handle are the standard visual configuration for the TeSys GS series.