The GV2APN10 is an extended rotary handle kit from the TeSys range, designed specifically for the GV2LE and GV2RT manual motor starters and disconnectors. It gives you a remote operating point for the starter — useful when the starter itself is buried deep in a panel and you need the handle on the door or a sub-panel face. The back-to-door distance spans 151 to 316 mm, so it covers a range of enclosure depths. The handle itself carries an IP54 rating, meaning it seals against dust ingress and splashing water at the panel interface — fine for most industrial environments short of direct washdown.
The extended handle lets you mount the operator on the enclosure door while the GV2LE or GV2RT stays on the DIN rail inside. That 151–316 mm range covers standard 200 mm and 300 mm deep enclosures without a custom spacer. The IP54 seal at the panel cutout means you don't need a separate gasket — the kit's front plate and handle assembly provide the seal. Padlocking is supported in both the ON and OFF positions, accepting 1 to 3 padlocks. That covers lockout/tagout requirements for the maintenance crew — they can lock the handle OFF at the door without opening the panel. The handle is black, the front plate is grey — standard industrial colouring that won't look out of place in a MCC lineup or a standalone enclosure.