The GV2DP222B7 is a TeSys Deca reversing motor starter combination from Schneider Electric — a pre-assembled block that pairs a GV2P motor circuit breaker with a reversing contactor and a GV2AF3 combination block, all on a 3-pole chassis. Thermal protection adjusts from 20 to 25 A, and the coil pulls 24 VAC at 50/60 Hz. The AC-3 utilisation category means it's rated for switching squirrel-cage motors under full load, not just resistive heaters.
Breaking capacity is rated Iq 50 kA at 400/415 V per IEC 60947-4-1, stepping down to 20 kA at 440 V and 10 kA at 500 V. That's the fault current the starter can safely interrupt — useful for panel builders sizing upstream protection. The magnetic trip is fixed at 327 A, so the instant-trip threshold sits well above the 20–25 A thermal band to handle motor inrush without nuisance trips.
Dimensions: 90 mm wide, 186.8 mm tall, 111.9 mm deep. The 111.9 mm depth means it clears most 120 mm-deep enclosures, but check gland-plate clearance if the backplane has deep terminal blocks behind it.
Motor power rating: 11 kW at 400/415 V AC 50/60 Hz, 15 kW at 500 V AC 50/60 Hz. That's the load it can start and run in AC-3 duty — a 15 kW motor on a 500 V line, or an 11 kW on a 400 V supply. Type 2 coordination means that under a short-circuit fault, the starter remains usable after replacing the breaker — no contactor welding that forces a full swap.