The TeSys GV2LC0206R is an enclosed direct-on-line (DOL) starter — a self-contained unit combining a circuit breaker and a magnetic trip in a single polycarbonate box. It's built for a fixed 1.6 A thermal protection setting, so it's sized to a specific motor FLA, not adjustable in the field. The IP54 rating (IEC 60529) tells you it's dust-protected and splash-proof — fine for a washdown area or a dusty panel, but not submersion. The polycarbonate enclosure won't corrode in a humid environment, and the rotary red handle gives a visible OFF position that can be padlocked (up to three 8 mm padlocks) for lockout/tagout.
This is a surface-mount enclosure, not DIN-rail — it bolts to a backplate or machine frame. The cable entries are pre-cut: two 20 mm and two 25 mm knockouts at both top and bottom, so you run your motor and line cables in without drilling. Dimensions are 166 mm high, 88 mm wide, 173 mm deep — it's a compact brick that fits in a standard small enclosure or on a machine pedestal. The 3-pole design handles three-phase motors up to 690 V rated operational voltage. It's non-reversing, so if you need forward/reverse, you'd pair it with an external contactor or use a different starter. The magnetic trip unit responds to short-circuit currents, while the thermal element (fixed at 1.6 A) protects against overload — no separate overload relay needed.