The Schneider Electric GV2LC0207 is an enclosed direct-on-line (DOL) motor starter from the TeSys GV2-LC family, combining a circuit breaker and a contactor in a single IP54 polycarbonate enclosure. The breaking capacity is 100 kA Icu across the board — at 220–230 V, 400–415 V, 440 V, and 500 V, all conforming to IEC 60947-2.
Where you'd use it
This is a non-reversing DOL starter for a three-phase motor load — think pumps, fans, conveyors, compressors in industrial or commercial buildings. Cable entries are at both top and bottom: two 25 mm ISO glands and two 20 mm ISO glands per end, which gives flexibility for routing incoming supply and outgoing motor leads without drilling the case.
Physical fit and standards
The enclosure measures 173 mm deep by 88 mm wide by 166 mm high — a compact footprint that fits on a standard backplate or machine frame without hogging space from the next starter. It complies with IEC 60947-4 (motor starters), IEC 60439-1 (low-voltage switchgear assemblies), VDE 0660-102, and EN 60947, so it's accepted across European and many international installations.