Skip to main content
Log in
Schneider Electric GV2P02KD09B7 — Miniature Circuit Breakers (MCB)

TeSys GV2P02KD09B7 motor starter, 0.25 A, 100 kA breaking ca

MPNGV2P02KD09B7
Obsolete

Schneider Electric TeSys GV2P02KD09B7 motor starter, 0.25 A line rated current, 100 kA breaking capacity at 400 V, 3-pole, 24 V AC coil, DIN rail mount.

Schneider Electric GV2P02KD09B7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P02KD09B7 — Identification
ParameterValue
Product rangeTeSys
Product/component typeMotor starter
GV2P02KD09B7 — Ratings
ParameterValue
Poles configuration3P
Breaking capacity100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2 100 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2 100 kA Icu 440 V AC 50/60 Hz IEC 60947-2 100 kA Icu 500 V AC 50/60 Hz IEC 60947-2 100 kA Icu 690 V AC 50/60 Hz IEC 60947-2
Rated operational voltage (Ue)Power circuit Power circuit 10 MOhm for signalling circuit
Rated insulation voltage (Ui)690 V AC 50/60 Hz IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV IEC 60947-2
Network frequency50/60 Hz IEC 60947-4-1
Utilisation categoryAC-4 AC-1 AC-3
GV2P02KD09B7 — Protection
ParameterValue
Electrical durability (cycles)100000 cycles AC-3 440 V
Mechanical durability (cycles)100000 cycles
GV2P02KD09B7 — Mechanical
ParameterValue
Control typeRotary knob
Terminal connection typescrew clamp terminals 2 0.002...0.009 in² (1...6 mm²) solid screw clamp terminals 2 0.002...0.009 in² (1.5...6 mm²) flexible without cable end screw clamp terminals 2 0.002...0.006 in² (1...4 mm²) flexible with cable end
Terminal tightening torque15.05 lbf.in (1.7 N.m) screw clamp terminals
Width1.8 in (45 mm)
Height3.5 in (89 mm)
Depth3.8 in (97 mm)
GV2P02KD09B7 — Environmental
ParameterValue
Operating ambient temperature23...140 °F (-5...60 °C)
Storage ambient temperature-76...176 °F (-60...80 °C)
IP degree of protectionIP20 IEC 60529
Pollution degree3
GV2P02KD09B7 — Approvals
ParameterValue
StandardsVDE 0660 NF C 63-650 CSA C22.2 VDE 0113 IEC 60947-4-1 UL 508 EN 60204 NF C 63-120 IEC 60947-1 IEC 60947-2 NF C 79-130
GV2P02KD09B7 — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % 690 V AC 50/60 Hz IEC 60947-2 100 % 500 V AC 50/60 Hz IEC 60947-2 100 % 230/240 V AC 50/60 Hz IEC 60947-2 100 % 440 V AC 50/60 Hz IEC 60947-2 100 % 400/415 V AC 50/60 Hz IEC 60947-2

Product details

The Schneider Electric TeSys GV2P02KD09B7 is a direct on-line motor starter with a 0.25 A line rated current, sized for a 0.06 kW motor at 400/415 V AC. It combines a contactor and thermal-magnetic overload in a single 45 mm wide package, controlled via a rotary knob. The 24 V AC coil is standard, and the unit clips onto a 35 mm symmetrical DIN rail or panels with two M4 screws. Rated for continuous duty per IEC 60947-4-1, it carries a 100 kA breaking capacity at 400/415 V AC under IEC 60947-2 — meaning it can safely interrupt a fault current up to that level without upstream damage. The magnetic tripping current is set at 2.4 A, and the unit is rated for 100,000 electrical cycles in AC-3 duty at 440 V.

The 45 mm width and 89 mm height fit standard enclosure layouts. Pollution degree 3 rating confirms it handles conductive pollution typical of industrial environments.

Frequently asked questions

What is the breaking capacity of this motor starter?

100 kA Icu at 230/240 V, 400/415 V, 440 V, 500 V, and 690 V AC per IEC 60947-2. This means it safely interrupts faults up to 100 kA across the full voltage range.

What motor power does this starter support?

Rated for a 0.06 kW motor at 400/415 V AC, 50/60 Hz. The motor power range covers 1.1–2 kW at 200–240 V, 2.2–3 kW at 380–440 V, and 4–6 kW at 480–500 V, all three-phase.

What approvals does this part carry?

Certified to UL 508, CSA C22.2, IEC 60947-1, IEC 60947-2, IEC 60947-4-1, VDE 0660, EN 60204, and NF C 63-120/650. Also carries a V1 flame retardance rating per UL 94.

MPN
GV2P02KD09B7