Skip to main content
Log in
Schneider Electric GV2P02KD09BL — Miniature Circuit Breakers (MCB)

Schneider TeSys GV2P02KD09BL Motor Starter, 0.25 A, 3P

MPNGV2P02KD09BL
Obsolete

Schneider Electric TeSys GV2P02KD09BL, direct on-line motor starter, 3-pole, 0.25 A rated current, 24 V DC low-consumption coil, 100 kA breaking capacity at 400 V AC.

Schneider Electric GV2P02KD09BL datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P02KD09BL — Identification
ParameterValue
Product rangeTeSys
Product/component typeMotor starter
GV2P02KD09BL — Ratings
ParameterValue
Poles configuration3P
Breaking capacity100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2 100 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2 100 kA Icu 440 V AC 50/60 Hz IEC 60947-2 100 kA Icu 500 V AC 50/60 Hz IEC 60947-2 100 kA Icu 690 V AC 50/60 Hz IEC 60947-2
Rated operational voltage (Ue)Power circuit Power circuit 10 MOhm for signalling circuit
Rated insulation voltage (Ui)690 V AC 50/60 Hz IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV IEC 60947-2
Network frequency50/60 Hz IEC 60947-4-1
Utilisation categoryAC-3 AC-1 AC-4
GV2P02KD09BL — Protection
ParameterValue
Electrical durability (cycles)100000 cycles AC-3 440 V
Mechanical durability (cycles)100000 cycles
GV2P02KD09BL — Mechanical
ParameterValue
Control typeRotary knob
Terminal connection typescrew clamp terminals 2 0.002...0.009 in² (1...6 mm²) solid screw clamp terminals 2 0.002...0.009 in² (1.5...6 mm²) flexible without cable end screw clamp terminals 2 0.002...0.006 in² (1...4 mm²) flexible with cable end
Terminal tightening torque15.05 lbf.in (1.7 N.m) screw clamp terminals
Width1.8 in (45 mm)
Height3.5 in (89 mm)
Depth3.8 in (97 mm)
GV2P02KD09BL — Environmental
ParameterValue
Operating ambient temperature23...140 °F (-5...60 °C)
Storage ambient temperature-76...176 °F (-60...80 °C)
IP degree of protectionIP20 IEC 60529
Pollution degree3
GV2P02KD09BL — Approvals
ParameterValue
StandardsVDE 0660 NF C 63-650 CSA C22.2 VDE 0113 IEC 60947-4-1 UL 508 EN 60204 NF C 63-120 IEC 60947-1 IEC 60947-2 NF C 79-130
GV2P02KD09BL — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % 690 V AC 50/60 Hz IEC 60947-2 100 % 500 V AC 50/60 Hz IEC 60947-2 100 % 230/240 V AC 50/60 Hz IEC 60947-2 100 % 440 V AC 50/60 Hz IEC 60947-2 100 % 400/415 V AC 50/60 Hz IEC 60947-2

Product details

The Schneider TeSys GV2P02KD09BL is a direct on-line motor starter combining a contactor and thermal-magnetic overload in a single 3-pole package. It is rated for a line current of 0.25 A and switches motor loads up to 0.06 kW at 400/415 V AC 50/60 Hz. The 24 V DC low-consumption coil holds in without a separate power supply for the control circuit — useful in PLC-driven panels where 24 V is already on the backplane. That rating simplifies coordination in a panel with a high-available-fault transformer.

The rotary knob for control keeps the front panel clean; no separate pushbutton station needed for manual on/off.

The approvals stack — UL 508, CSA C22.2, IEC 60947-4-1, VDE 0660 — covers North American and European panel builds without a separate certification variant.

Frequently asked questions

What are the key ratings for this motor starter?

Rated line current is 0.25 A, motor power is 0.06 kW at 400/415 V AC, breaking capacity is 100 kA Icu at 400 V AC per IEC 60947-2, and the coil is 24 V DC low consumption.

What standards does the GV2P02KD09BL comply with?

It is certified to UL 508, CSA C22.2, IEC 60947-4-1, IEC 60947-2, VDE 0660, EN 60204, and NF C 63-120 among others. Flame retardance is V1 per UL 94.

MPN
GV2P02KD09BL