Skip to main content
Log in
Schneider Electric GV2P02KD09G7 — Miniature Circuit Breakers (MCB)

Schneider TeSys GV2P02KD09G7 Motor Starter, 0.25 A, 0.06 kW

MPNGV2P02KD09G7
Obsolete

Schneider Electric TeSys GV2P02KD09G7 motor starter, 0.25 A line rated current, 0.06 kW motor power at 400 V AC, 100 kA breaking capacity, 3-pole, DIN rail mount.

Schneider Electric GV2P02KD09G7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P02KD09G7 — Identification
ParameterValue
Product rangeTeSys
Product/component typeMotor starter
GV2P02KD09G7 — Ratings
ParameterValue
Poles configuration3P
Breaking capacity100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2 100 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2 100 kA Icu 440 V AC 50/60 Hz IEC 60947-2 100 kA Icu 500 V AC 50/60 Hz IEC 60947-2 100 kA Icu 690 V AC 50/60 Hz IEC 60947-2
Rated operational voltage (Ue)Power circuit Power circuit 10 MOhm for signalling circuit
Rated insulation voltage (Ui)690 V AC 50/60 Hz IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV IEC 60947-2
Network frequency50/60 Hz IEC 60947-4-1
Utilisation categoryAC-3 AC-1 AC-4
GV2P02KD09G7 — Protection
ParameterValue
Electrical durability (cycles)100000 cycles AC-3 440 V
Mechanical durability (cycles)100000 cycles
GV2P02KD09G7 — Mechanical
ParameterValue
Control typeRotary knob
Terminal connection typescrew clamp terminals 2 0.002...0.009 in² (1...6 mm²) solid screw clamp terminals 2 0.002...0.009 in² (1.5...6 mm²) flexible without cable end screw clamp terminals 2 0.002...0.006 in² (1...4 mm²) flexible with cable end
Terminal tightening torque15.05 lbf.in (1.7 N.m) screw clamp terminals
Width1.8 in (45 mm)
Height3.5 in (89 mm)
Depth3.8 in (97 mm)
GV2P02KD09G7 — Environmental
ParameterValue
Operating ambient temperature23...140 °F (-5...60 °C)
Storage ambient temperature-76...176 °F (-60...80 °C)
IP degree of protectionIP20 IEC 60529
Pollution degree3
GV2P02KD09G7 — Approvals
ParameterValue
StandardsVDE 0660 NF C 63-650 CSA C22.2 VDE 0113 IEC 60947-4-1 UL 508 EN 60204 NF C 63-120 IEC 60947-1 IEC 60947-2 NF C 79-130
GV2P02KD09G7 — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % 690 V AC 50/60 Hz IEC 60947-2 100 % 500 V AC 50/60 Hz IEC 60947-2 100 % 230/240 V AC 50/60 Hz IEC 60947-2 100 % 440 V AC 50/60 Hz IEC 60947-2 100 % 400/415 V AC 50/60 Hz IEC 60947-2

Product details

The Schneider Electric TeSys GV2P02KD09G7 is a direct on-line motor starter rated for a line current of 0.25 A and motor power of 0.06 kW at 400/415 V AC, 50/60 Hz. It's sized for the smallest fractional-horsepower motors — think fans, small pumps, or conveyor drives where the load is under 100 W.

Mounts on 35 mm symmetrical DIN rail or panel-screwed with two M4 screws. IP20 finger-safe enclosure suits panel-mount; no washdown rating, so keep it inside the cabinet.

Frequently asked questions

What are the key ratings for this motor starter?

Line rated current is 0.25 A, motor power is 0.06 kW at 400/415 V AC, and breaking capacity is 100 kA Icu across the voltage range from 230 V to 690 V AC.

What compliance standards does the GV2P02KD09G7 meet?

It complies with IEC 60947-2, IEC 60947-4-1, UL 508, CSA C22.2, VDE 0660, and EN 60204, among others.

MPN
GV2P02KD09G7