Skip to main content
Log in
Schneider Electric GV2P03KD09BL — Miniature Circuit Breakers (MCB)

Schneider TeSys GV2P03KD09BL Motor Starter, 0.4 A, 0.09 kW

MPNGV2P03KD09BL
Obsolete

Schneider Electric TeSys GV2P03KD09BL motor starter, 3-pole, 0.4 A line rated current, 0.09 kW at 400 V, 100 kA breaking capacity, 24 V DC coil, screw clamp terminals.

Schneider Electric GV2P03KD09BL datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P03KD09BL — Identification
ParameterValue
Product rangeTeSys
Product/component typeMotor starter
GV2P03KD09BL — Ratings
ParameterValue
Poles configuration3P
Breaking capacity100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2 100 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2 100 kA Icu 440 V AC 50/60 Hz IEC 60947-2 100 kA Icu 500 V AC 50/60 Hz IEC 60947-2 100 kA Icu 690 V AC 50/60 Hz IEC 60947-2
Rated operational voltage (Ue)Power circuit Power circuit 10 MOhm for signalling circuit
Rated insulation voltage (Ui)690 V AC 50/60 Hz IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV IEC 60947-2
Network frequency50/60 Hz IEC 60947-4-1
Utilisation categoryAC-3 AC-1 AC-4
GV2P03KD09BL — Protection
ParameterValue
Electrical durability (cycles)100000 cycles AC-3 440 V
Mechanical durability (cycles)100000 cycles
GV2P03KD09BL — Mechanical
ParameterValue
Control typeRotary knob
Terminal connection typescrew clamp terminals 2 0.002...0.009 in² (1...6 mm²) solid screw clamp terminals 2 0.002...0.009 in² (1.5...6 mm²) flexible without cable end screw clamp terminals 2 0.002...0.006 in² (1...4 mm²) flexible with cable end
Terminal tightening torque15.05 lbf.in (1.7 N.m) screw clamp terminals
Width1.8 in (45 mm)
Height3.5 in (89 mm)
Depth3.8 in (97 mm)
GV2P03KD09BL — Environmental
ParameterValue
Operating ambient temperature23...140 °F (-5...60 °C)
Storage ambient temperature-76...176 °F (-60...80 °C)
IP degree of protectionIP20 IEC 60529
Pollution degree3
GV2P03KD09BL — Approvals
ParameterValue
StandardsNF C 63-120 IEC 60947-4-1 NF C 79-130 IEC 60947-2 NF C 63-650 CSA C22.2 VDE 0113 VDE 0660 EN 60204 IEC 60947-1 UL 508
GV2P03KD09BL — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % 690 V AC 50/60 Hz IEC 60947-2 100 % 500 V AC 50/60 Hz IEC 60947-2 100 % 230/240 V AC 50/60 Hz IEC 60947-2 100 % 440 V AC 50/60 Hz IEC 60947-2 100 % 400/415 V AC 50/60 Hz IEC 60947-2

Product details

The Schneider Electric TeSys GV2P03KD09BL is a direct on-line motor starter combining a contactor and thermal-magnetic overload relay in a single 45 mm wide unit. It is rated for a line current of 0.4 A and delivers 0.09 kW at 400/415 V AC, 50/60 Hz — sized for the smallest fractional-horsepower motors on a line. The 24 V DC low-consumption coil holds in at nominal voltage; the rotary-knob control gives a clear on/off visual state for the panel builder or field tech.

The 45 mm width (1.8 in) and 97 mm depth (3.8 in) fit a standard 8-module enclosure row with room for a feeder breaker alongside. Screw-clamp terminals accept 1 to 6 mm² solid or 1.5 to 6 mm² flexible without ferrules; torque to 1.7 N·m. IP20 finger-safe protection per IEC 60529 covers the terminals; the IK04 impact rating handles accidental tool contact inside the panel.

Frequently asked questions

What are the key ratings for this motor starter?

Line rated current 0.4 A, motor power 0.09 kW at 400/415 V AC, breaking capacity 100 kA Icu up to 690 V AC, 24 V DC coil, screw-clamp terminals, IP20 protection.

What standards does GV2P03KD09BL comply with?

It complies with IEC 60947-4-1, IEC 60947-2, UL 508, CSA C22.2, VDE 0660, EN 60204, and NF C 63-120 among others.

How is this motor starter mounted?

It snaps onto a 35 mm symmetrical DIN rail or can be panel-mounted with two M4 screws. Width is 45 mm, depth 97 mm.

MPN
GV2P03KD09BL