Skip to main content
Log in
Schneider Electric GV2P03KD09G7 — Miniature Circuit Breakers (MCB)

Schneider TeSys GV2P03KD09G7 Motor Starter, 0.4 A, 0.09 kW

MPNGV2P03KD09G7
Obsolete

Schneider Electric TeSys GV2P03KD09G7, direct on-line motor starter, 0.4 A line rated current, 0.09 kW at 400/415 V AC, 100 kA breaking capacity, 3-pole, IP20.

Schneider Electric GV2P03KD09G7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P03KD09G7 — Identification
ParameterValue
Product rangeTeSys
Product/component typeMotor starter
GV2P03KD09G7 — Ratings
ParameterValue
Poles configuration3P
Breaking capacity100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2 100 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2 100 kA Icu 440 V AC 50/60 Hz IEC 60947-2 100 kA Icu 500 V AC 50/60 Hz IEC 60947-2 100 kA Icu 690 V AC 50/60 Hz IEC 60947-2
Rated operational voltage (Ue)Power circuit Power circuit 10 MOhm for signalling circuit
Rated insulation voltage (Ui)690 V AC 50/60 Hz IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV IEC 60947-2
Network frequency50/60 Hz IEC 60947-4-1
Utilisation categoryAC-3 AC-1 AC-4
GV2P03KD09G7 — Protection
ParameterValue
Electrical durability (cycles)100000 cycles AC-3 440 V
Mechanical durability (cycles)100000 cycles
GV2P03KD09G7 — Mechanical
ParameterValue
Control typeRotary knob
Terminal connection typescrew clamp terminals 2 0.002...0.009 in² (1...6 mm²) solid screw clamp terminals 2 0.002...0.009 in² (1.5...6 mm²) flexible without cable end screw clamp terminals 2 0.002...0.006 in² (1...4 mm²) flexible with cable end
Terminal tightening torque15.05 lbf.in (1.7 N.m) screw clamp terminals
Width1.8 in (45 mm)
Height3.5 in (89 mm)
Depth3.8 in (97 mm)
GV2P03KD09G7 — Environmental
ParameterValue
Operating ambient temperature23...140 °F (-5...60 °C)
Storage ambient temperature-76...176 °F (-60...80 °C)
IP degree of protectionIP20 IEC 60529
Pollution degree3
GV2P03KD09G7 — Approvals
ParameterValue
StandardsNF C 63-120 IEC 60947-4-1 NF C 79-130 IEC 60947-2 NF C 63-650 CSA C22.2 VDE 0113 VDE 0660 EN 60204 IEC 60947-1 UL 508
GV2P03KD09G7 — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % 690 V AC 50/60 Hz IEC 60947-2 100 % 500 V AC 50/60 Hz IEC 60947-2 100 % 230/240 V AC 50/60 Hz IEC 60947-2 100 % 440 V AC 50/60 Hz IEC 60947-2 100 % 400/415 V AC 50/60 Hz IEC 60947-2

Product details

The Schneider Electric TeSys GV2P03KD09G7 is a direct on-line motor starter combining a contactor and thermal-magnetic overload relay in a single 45 mm wide package. It is rated for a line current of 0.4 A and delivers 0.09 kW at 400/415 V AC 50/60 Hz, sized for fractional-horsepower motors on small pumps, fans, or conveyors. It carries IEC 60947-2 and UL 508 approvals, so it qualifies for North American and European installations.

The 45 mm width leaves room for adjacent starters in a multi-motor group.

Frequently asked questions

What are the key ratings for this motor starter?

Line rated current is 0.4 A, motor power is 0.09 kW at 400/415 V AC, and breaking capacity is 100 kA across 230 V to 690 V AC. It is a 3-pole direct on-line starter with AC-3 utilization category for motor switching.

What compliance documentation does this part carry?

It complies with IEC 60947-2, IEC 60947-4-1, UL 508, CSA C22.2, and VDE 0660 standards. Flame retardance is V1 per UL 94, and fire resistance is 850 °C per IEC 60695-2-1.

MPN
GV2P03KD09G7