Skip to main content
Log in
Schneider Electric GV2P04KD09G7 — Miniature Circuit Breakers (MCB)

Schneider TeSys GV2P04KD09G7 Motor Starter, 0.63 A, 100 kA

MPNGV2P04KD09G7
Obsolete

Schneider Electric TeSys GV2P04KD09G7, motor starter, 3-pole, 0.63 A rated current, 100 kA breaking capacity, 24 V AC coil, DIN-rail mount.

Schneider Electric GV2P04KD09G7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P04KD09G7 — Identification
ParameterValue
Product rangeTeSys
Product/component typeMotor starter
GV2P04KD09G7 — Ratings
ParameterValue
Poles configuration3P
Breaking capacity100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2 100 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2 100 kA Icu 440 V AC 50/60 Hz IEC 60947-2 100 kA Icu 500 V AC 50/60 Hz IEC 60947-2 100 kA Icu 690 V AC 50/60 Hz IEC 60947-2
Rated operational voltage (Ue)Power circuit Power circuit 10 MOhm for signalling circuit
Rated insulation voltage (Ui)690 V AC 50/60 Hz IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV IEC 60947-2
Network frequency50/60 Hz IEC 60947-4-1
Utilisation categoryAC-4 AC-1 AC-3
GV2P04KD09G7 — Protection
ParameterValue
Electrical durability (cycles)100000 cycles AC-3 440 V
Mechanical durability (cycles)100000 cycles
GV2P04KD09G7 — Mechanical
ParameterValue
Control typeRotary knob
Terminal connection typescrew clamp terminals 2 0.002...0.009 in² (1...6 mm²) solid screw clamp terminals 2 0.002...0.009 in² (1.5...6 mm²) flexible without cable end screw clamp terminals 2 0.002...0.006 in² (1...4 mm²) flexible with cable end
Terminal tightening torque15.05 lbf.in (1.7 N.m) screw clamp terminals
Width1.8 in (45 mm)
Height3.5 in (89 mm)
Depth3.8 in (97 mm)
GV2P04KD09G7 — Environmental
ParameterValue
Operating ambient temperature23...140 °F (-5...60 °C)
Storage ambient temperature-76...176 °F (-60...80 °C)
IP degree of protectionIP20 IEC 60529
Pollution degree3
GV2P04KD09G7 — Approvals
ParameterValue
StandardsVDE 0113 UL 508 EN 60204 NF C 63-650 NF C 63-120 IEC 60947-2 IEC 60947-4-1 IEC 60947-1 NF C 79-130 CSA C22.2 VDE 0660
GV2P04KD09G7 — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % 690 V AC 50/60 Hz IEC 60947-2 100 % 500 V AC 50/60 Hz IEC 60947-2 100 % 230/240 V AC 50/60 Hz IEC 60947-2 100 % 440 V AC 50/60 Hz IEC 60947-2 100 % 400/415 V AC 50/60 Hz IEC 60947-2

Product details

The Schneider Electric TeSys GV2P04KD09G7 is a 3-pole direct on-line motor starter rated for continuous duty per IEC 60947-4-1. Its line rated current of 0.63 A and motor power range of 0.12 kW at 400/415 V AC (0.18 kW at 400/415 V, 0.37 kW at 690 V) define the small motor loads it protects — think fractional-horsepower pumps, fans, or conveyor drives in a control panel. Breaking capacity is a standout: 100 kA Icu across the full voltage range from 230 V to 690 V AC per IEC 60947-2.

Mounts on 35 mm symmetrical DIN rail (clipped) or panel-screwed with 2 x M4 screws. Screw-clamp terminals accept 1 to 6 mm² solid or stranded wire, torqued to 1.7 N·m.

Compliant with IEC 60947-2, IEC 60947-4-1, UL 508, CSA C22.2, EN 60204, and VDE 0113. Pollution degree 3, flame retardance V1 per UL 94, and glow-wire tested at 850 °C per IEC 60695-2-1. These approvals cover panel-build compliance for North American and European markets.

Frequently asked questions

What is the breaking capacity of this motor starter?

100 kA Icu at 230/240 V, 400/415 V, 440 V, 500 V, and 690 V AC, 50/60 Hz per IEC 60947-2. This is consistent across the full voltage range.

What motor power does this starter cover?

0.12 kW at 400/415 V AC, 0.18 kW at 400/415 V AC, and 0.37 kW at 690 V AC, all at 50/60 Hz. The motor power range also covers 1.1 to 2 kW at 200–240 V three-phase and 2.2 to 3 kW at 380–440 V three-phase.

What are the mounting options?

Snap-on 35 mm symmetrical DIN rail or panel-mount with 2 x M4 screws. Dimensions are 45 mm wide, 89 mm high, 97 mm deep.

MPN
GV2P04KD09G7