Skip to main content
Log in
Schneider Electric GV2P05KD09G7 — Miniature Circuit Breakers (MCB)

Schneider TeSys GV2P05KD09G7 Motor Starter, 1 A, 100 kA

MPNGV2P05KD09G7
Obsolete

Schneider Electric TeSys GV2P05KD09G7 manual motor starter, 3-pole, 1 A rated current, 100 kA breaking capacity at 400 V AC, 0.25 kW at 400 V, IP20, DIN rail mount.

Schneider Electric GV2P05KD09G7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P05KD09G7 — Identification
ParameterValue
Product rangeTeSys
Product/component typeMotor starter
GV2P05KD09G7 — Ratings
ParameterValue
Poles configuration3P
Breaking capacity100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2 100 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2 100 kA Icu 440 V AC 50/60 Hz IEC 60947-2 100 kA Icu 500 V AC 50/60 Hz IEC 60947-2 100 kA Icu 690 V AC 50/60 Hz IEC 60947-2
Rated operational voltage (Ue)Power circuit Power circuit 10 MOhm for signalling circuit
Rated insulation voltage (Ui)690 V AC 50/60 Hz IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV IEC 60947-2
Network frequency50/60 Hz IEC 60947-4-1
Utilisation categoryAC-3 AC-1 AC-4
GV2P05KD09G7 — Protection
ParameterValue
Electrical durability (cycles)100000 cycles AC-3 440 V
Mechanical durability (cycles)100000 cycles
GV2P05KD09G7 — Mechanical
ParameterValue
Control typeRotary knob
Terminal connection typescrew clamp terminals 2 0.002...0.009 in² (1...6 mm²) solid screw clamp terminals 2 0.002...0.009 in² (1.5...6 mm²) flexible without cable end screw clamp terminals 2 0.002...0.006 in² (1...4 mm²) flexible with cable end
Terminal tightening torque15.05 lbf.in (1.7 N.m) screw clamp terminals
Width1.8 in (45 mm)
Height3.5 in (89 mm)
Depth3.8 in (97 mm)
GV2P05KD09G7 — Environmental
ParameterValue
Operating ambient temperature23...140 °F (-5...60 °C)
Storage ambient temperature-76...176 °F (-60...80 °C)
IP degree of protectionIP20 IEC 60529
Pollution degree3
GV2P05KD09G7 — Approvals
ParameterValue
StandardsNF C 63-650 VDE 0113 IEC 60947-1 VDE 0660 CSA C22.2 IEC 60947-4-1 NF C 63-120 NF C 79-130 IEC 60947-2 EN 60204 UL 508
GV2P05KD09G7 — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % 690 V AC 50/60 Hz IEC 60947-2 100 % 500 V AC 50/60 Hz IEC 60947-2 100 % 230/240 V AC 50/60 Hz IEC 60947-2 100 % 440 V AC 50/60 Hz IEC 60947-2 100 % 400/415 V AC 50/60 Hz IEC 60947-2

Product details

The Schneider Electric TeSys GV2P05KD09G7 is a 3-pole manual motor starter rated for 1 A line current, designed for direct on-line motor starting and protection of resistive loads. It's part of the TeSys range, a widely deployed family for motor control in industrial panels and machinery. Motor power rating is 0.25 kW at 400/415 V AC and 0.55 kW at 690 V AC, so it's sized for small motor loads — think fractional-hp pumps, fans, or conveyor drives in a control panel.

The 45 mm width (1.8 in) means it takes a single modular slot on the rail, leaving room for contactor blocks or auxiliaries alongside.

Listed to UL 508, CSA C22.2, IEC 60947-2, IEC 60947-4-1, and EN 60204 — so it's accepted across North American and European installs. Flame retardance is V1 per UL 94; glow-wire tested to 850 °C per IEC 60695-2-1.

Frequently asked questions

What is the breaking capacity of GV2P05KD09G7?

100 kA Icu at 230/240 V, 400/415 V, 440 V, 500 V, and 690 V AC per IEC 60947-2 — so it's a high-fault-rated starter for a 1 A device.

What standards does GV2P05KD09G7 comply with?

UL 508, CSA C22.2, IEC 60947-2, IEC 60947-4-1, EN 60204, VDE 0660, and NF C 63-650, among others. Flame retardance is V1 per UL 94.

What is the mounting method for GV2P05KD09G7?

Snaps onto 35 mm symmetrical DIN rail or screws to a panel with two M4 screws. Width is 45 mm (1.8 in), one modular DIN slot.

MPN
GV2P05KD09G7