Skip to main content
Log in
Schneider Electric GV2P06AE11TQ — Miniature Circuit Breakers (MCB)

GV2P06AE11TQ TeSys GV2 Motor Circuit Breaker, 1.6 A, 3P

MPNGV2P06AE11TQ
Obsolete

Schneider Electric TeSys GV2 series motor circuit breaker, order code GV2P06AE11TQ, 3-pole, 1.6 A rated current, thermal-magnetic trip, 100 kA breaking capacity.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P06AE11TQ — Identification
ParameterValue
Product nameTeSys GV2
Product rangeTeSys Deca
Product/component typeMotor circuit breaker
Device applicationMotor protection
GV2P06AE11TQ — Ratings
ParameterValue
Rated current (In)1.6 A
Poles configuration3P
Breaking capacity100 kA Icu at 230/240 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 690 V AC 50/60 Hz conforming to IEC 60947-2
Rated operational voltage (Ue)690 V AC 50/60 Hz conforming to IEC 60947-2
Rated insulation voltage (Ui)690 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV conforming to IEC 60947-2
Network type (AC/DC)AC
Network frequency50/60 Hz conforming to IEC 60947-2
Utilisation categoryCategory A conforming to IEC 60947-2 AC-3 conforming to IEC 60947-4-1 AC-3e conforming to IEC 60947-4-1
GV2P06AE11TQ — Protection
ParameterValue
Trip unit technologyThermal-magnetic
Suitability for isolationYes conforming to IEC 60947-1
Electrical durability (cycles)100000 cycles for AC-3 at 415 V In 100000 cycles for AC-3e at 415 V In
Mechanical durability (cycles)100000 cycles
GV2P06AE11TQ — Mechanical
ParameterValue
Control typeRotary handle
Terminal connection typePower circuit: screw clamp terminal 2 cable(s) 1...6 mm²solid Power circuit: screw clamp terminal 2 cable(s) 1.5...6 mm²flexible without cable end Power circuit: screw clamp terminal 2 cable(s) 1...4 mm²flexible with cable end
Terminal tightening torque1.7 N.m - on screw clamp terminal
Width45 mm
Height89 mm
Depth97 mm
GV2P06AE11TQ — Environmental
ParameterValue
Operating ambient temperature-20...60 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to IEC 60529
GV2P06AE11TQ — Approvals
ParameterValue
StandardsEN/IEC 60947-2 EN/IEC 60947-4-1 UL 60947-4-1 CSA C22.2 No 60947-4-1 IEC/EN 60335-2-40:Annex JJ IEC/EN 60335-1:Clause 30.2
GV2P06AE11TQ — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % at 230/240 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 440 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 500 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 690 V AC 50/60 Hz conforming to IEC 60947-2

Product details

The GV2P06AE11TQ: Rated current In = 1.6 A and magnetic trip at 26.2 A means this breaker is sized for small motor loads — think fractional-horsepower pumps, fans, or conveyor drives drawing under 1.6 A continuous. Motor power ratings span 0.37 kW at 400 V up to 0.75 kW at 690 V, so the same breaker covers a range of motor sizes depending on your line voltage. Phase failure sensitivity per IEC 60947-4-1 is built in — it will trip if one phase drops, preventing single-phasing damage on the motor.

Certified to EN/IEC 60947-2 (circuit-breaker standard) and EN/IEC 60947-4-1 (motor-starter standard), plus UL 60947-4-1 and CSA C22.2 No 60947-4-1 for North American acceptance. Also listed for IEC/EN 60335-2-40 Annex JJ (heat pump requirements) and IEC/EN 60335-1 Clause 30.2 (glow-wire test at 960 °C). That combination means the part is accepted in European, North American, and appliance-standard jurisdictions without extra qualification.

Frequently asked questions

What is the closest alternative to GV2P06AE11TQ in the TeSys GV2 family?

Within the same TeSys Deca range, the GV2P06AE11TQ is the variant with 1.6 A rating, 3 poles, and 1 NO + 1 NC auxiliary contacts. A sibling with a different current rating (e.g., 2.5 A) would be the same physical footprint but a different trip curve point — choose based on your motor FLA.

What is the depth of GV2P06AE11TQ?

The depth is 97 mm, with a width of 45 mm and height of 89 mm, fitting standard DIN-rail enclosures.

What compliance documentation is available for GV2P06AE11TQ?

The part carries certifications to EN/IEC 60947-2, EN/IEC 60947-4-1, UL 60947-4-1, CSA C22.2 No 60947-4-1, IEC/EN 60335-2-40 Annex JJ, and IEC/EN 60335-1 Clause 30.2. RoHS and REACH compliance is standard for Schneider TeSys products.

MPN
GV2P06AE11TQ