Skip to main content
Log in
Schneider Electric GV2P07TQ — Miniature Circuit Breakers (MCB)

Schneider TeSys GV2 GV2P07TQ Motor Circuit Breaker, 2.5 A, 1

MPNGV2P07TQ
Obsolete

Schneider Electric TeSys GV2 motor circuit breaker, GV2P07TQ, 3-pole, 2.5 A rated current, thermal-magnetic trip, 100 kA breaking capacity at 400 V AC, DIN rail mount.

Schneider Electric GV2P07TQ datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P07TQ — Identification
ParameterValue
Product nameTeSys GV2
Product rangeTeSys Deca
Product/component typeMotor circuit breaker
Device applicationMotor protection
GV2P07TQ — Ratings
ParameterValue
Rated current (In)2.5 A
Poles configuration3P
Breaking capacity100 kA Icu at 230/240 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 8 kA Icu at 690 V AC 50/60 Hz conforming to IEC 60947-2
Rated operational voltage (Ue)690 V AC 50/60 Hz conforming to IEC 60947-2
Rated insulation voltage (Ui)690 V AC 50/60 Hz conforming to IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV conforming to IEC 60947-2
Network type (AC/DC)AC
Network frequency50/60 Hz conforming to IEC 60947-2
Utilisation categoryCategory A conforming to IEC 60947-2 AC-3 conforming to IEC 60947-4-1 AC-3e conforming to IEC 60947-4-1
GV2P07TQ — Protection
ParameterValue
Trip unit technologyThermal-magnetic
Suitability for isolationYes conforming to IEC 60947-1
Electrical durability (cycles)100000 cycles for AC-3 at 415 V In 100000 cycles for AC-3e at 415 V In
Mechanical durability (cycles)100000 cycles
GV2P07TQ — Mechanical
ParameterValue
Control typeRotary handle
Terminal connection typePower circuit: screw clamp terminal 2 cable(s) 1...6 mm²solid Power circuit: screw clamp terminal 2 cable(s) 1.5...6 mm²flexible without cable end Power circuit: screw clamp terminal 2 cable(s) 1...4 mm²flexible with cable end
Terminal tightening torque1.7 N.m - on screw clamp terminal
Width45 mm
Height89 mm
Depth97 mm
GV2P07TQ — Environmental
ParameterValue
Operating ambient temperature-20...60 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to IEC 60529
GV2P07TQ — Approvals
ParameterValue
StandardsEN/IEC 60947-2 EN/IEC 60947-4-1 UL 60947-4-1 CSA C22.2 No 60947-4-1 IEC/EN 60335-2-40:Annex JJ IEC/EN 60335-1:Clause 30.2
GV2P07TQ — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % at 230/240 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 440 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 500 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 690 V AC 50/60 Hz conforming to IEC 60947-2

Product details

The Schneider Electric TeSys GV2 GV2P07TQ is a 3-pole motor circuit breaker with a thermal-magnetic trip unit rated at 2.5 A. It's sized for a 0.75 kW motor at 400/415 V AC, 50/60 Hz, and steps up to 1.1 kW at 500 V or 1.5 kW at 690 V. The magnetic trip is fixed at 39 A, so it clears short-circuits fast without nuisance tripping on normal motor start inrush. Breaking capacity hits 100 kA Icu at 230–500 V AC per IEC 60947-2, dropping to 8 kA at 690 V.

The 45 mm wide footprint (3-module) fits standard enclosure cutouts. Orientation is flexible — horizontal or vertical — so you can lay out a dense motor control center without worrying about derating for position. Power connections are screw-clamp terminals accepting up to 2 x 6 mm² solid or 2 x 4 mm² flexible with ferrule. Tightening torque is 1.7 N·m. The IP20 finger-safe front and IK04 impact rating mean it's fine inside a locked panel but not for open-machine mounting.

Carries EN/IEC 60947-2 and -4-1, plus UL 60947-4-1 and CSA C22.2 No 60947-4-1 — so it's accepted in North American and European panels. Also meets IEC/EN 60335-2-40 Annex JJ for heat-pump applications and IEC/EN 60335-1 Clause 30.2 for glow-wire resistance. Fire resistance tested to 960 °C per IEC 60695-2-11.

Frequently asked questions

What is the closest alternative to GV2P07TQ in the same family?

Within the TeSys GV2 range, the GV2P07 (without the 'TQ' suffix) is the standard individual-pack variant. The GV2P07TQ ships as a set of 24 units on a tray, which is the only functional difference — ratings and footprint are identical.

What are the key ratings for this motor circuit breaker?

Rated current In is 2.5 A with a fixed magnetic trip at 39 A. Breaking capacity is 100 kA Icu at 400/415 V AC. Motor power is 0.75 kW at 400 V, 1.1 kW at 500 V, 1.5 kW at 690 V. It's a 3-pole thermal-magnetic design for AC-3 and AC-3e duty.

What compliance documentation does Schneider provide for GV2P07TQ?

The part is certified to EN/IEC 60947-2, EN/IEC 60947-4-1, UL 60947-4-1, and CSA C22.2 No 60947-4-1. It also meets IEC/EN 60335-2-40 Annex JJ and IEC/EN 60335-1 Clause 30.2 for appliance applications.

MPN
GV2P07TQ