Skip to main content
Log in
Schneider Electric GV2P08AE11TQ — Miniature Circuit Breakers (MCB)

Schneider GV2P08AE11TQ TeSys Deca Motor Circuit Breaker, 4 A

MPNGV2P08AE11TQ
Active

Schneider Electric TeSys Deca GV2P08AE11TQ motor circuit breaker, 3-pole, 4 A rated current, thermal-magnetic trip, 100 kA breaking capacity at 400 V AC, IP20.

$151.63Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P08AE11TQ — Identification
ParameterValue
Product nameTeSys GV2
Product rangeTeSys Deca
Product/component typeMotor circuit breaker
Device applicationMotor protection
GV2P08AE11TQ — Ratings
ParameterValue
Rated current (In)4 A
Poles configuration3P
Breaking capacity100 kA Icu at 230/240 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 8 kA Icu at 690 V AC 50/60 Hz conforming to IEC 60947-2
Rated operational voltage (Ue)600 V AC 50/60 Hz conforming to UL 508 690 V AC 50/60 Hz conforming to IEC 60947-2 600 V AC 50/60 Hz conforming to CSA C22.2 No 14
Rated insulation voltage (Ui)690 V AC 50/60 Hz conforming to IEC 60947-2 690 V conforming to IEC 60947-2 600 V conforming to CSA C22.2 No 14
Rated impulse withstand voltage (Uimp)6 kV conforming to IEC 60947-2
Network type (AC/DC)AC
Network frequency50/60 Hz conforming to IEC 60947-2
Utilisation categoryCategory A conforming to IEC 60947-2 AC-3 conforming to IEC 60947-4-1 AC-3e conforming to IEC 60947-4-1
GV2P08AE11TQ — Protection
ParameterValue
Trip unit technologyThermal-magnetic
Suitability for isolationYes conforming to IEC 60947-1
Electrical durability (cycles)100000 cycles for AC-3 at 415 V In 100000 cycles for AC-3e at 415 V In
Mechanical durability (cycles)100000 cycles
GV2P08AE11TQ — Mechanical
ParameterValue
Control typeRotary handle
Terminal connection typePower circuit: screw clamp terminal 2 cable(s) 1...6 mm²solid Power circuit: screw clamp terminal 2 cable(s) 1.5...6 mm²flexible without cable end Power circuit: screw clamp terminal 2 cable(s) 1...4 mm²flexible with cable end
Terminal tightening torque1.7 N.m - on screw clamp terminal
Width45 mm
Height89 mm
Depth97 mm
GV2P08AE11TQ — Environmental
ParameterValue
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to IEC 60529
GV2P08AE11TQ — Approvals
ParameterValue
StandardsEN/IEC 60947-2 EN/IEC 60947-4-1 UL 60947-4-1 CSA C22.2 No 60947-4-1 IEC/EN 60335-2-40:Annex JJ IEC/EN 60335-1:Clause 30.2
GV2P08AE11TQ — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % at 230...240 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 400...415 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 440 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 500 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 690 V AC 50/60 Hz conforming to IEC 60947-2

Product details

Motor circuit breaker for 1.1 kW at 400 V

The Schneider Electric GV2P08AE11TQ is a TeSys Deca motor circuit breaker rated at 4 A, sized for a 1.1 kW motor at 400...415 V AC. Rated for AC-3 duty (motor switching), it handles 100,000 electrical cycles at 415 V at full rated current. The utilisation category AC-3e is also listed, covering enhanced motor switching for higher-performance applications. Phase failure sensitivity is built in per IEC 60947-4-1, so the breaker trips if one phase drops out — a common failure mode that can burn out a motor running single-phase.

The 45 mm wide body fits standard enclosure cutouts, and the rotary handle provides local manual control. Screw-clamp terminals accept up to 6 mm² solid or 4 mm² flexible with ferrule — torque to 1.7 N·m. The IP20 finger-safe enclosure suits panel-mount applications where the breaker is behind a locked door or cover. Built-in auxiliary contacts (1 NO + 1 NC) on the front allow remote status indication without adding a separate block.

Frequently asked questions

What are the key ratings for this motor circuit breaker?

Rated current 4 A, magnetic trip at 74 A, breaking capacity 100 kA Icu at 400 V AC. Suits a 1.1 kW motor at 400 V three-phase. Thermal-magnetic trip unit with phase failure sensitivity.

What compliance documentation does this part carry?

Listed to EN/IEC 60947-2, EN/IEC 60947-4-1, UL 60947-4-1, and CSA C22.2 No 60947-4-1. Also complies with IEC/EN 60335-2-40 Annex JJ and IEC/EN 60335-1 Clause 30.2 for fire resistance (960 °C glow-wire test).

What is the closest alternative within the TeSys Deca family?

Within the same GV2P series, the closest alternative would be a different current rating — the mechanical footprint and auxiliary contact arrangement are identical across the range. The deciding factor is the motor full-load current: select the GV2P variant whose rated current matches your motor nameplate.

MPN
GV2P08AE11TQ