Skip to main content
Log in
Schneider Electric GV2P14KD09B7 — Miniature Circuit Breakers (MCB)

Schneider Electric GV2P14KD09B7 TeSys Motor Starter, 10 A, 1

MPNGV2P14KD09B7
Obsolete

Schneider Electric TeSys GV2P14KD09B7, motor starter, 3-pole, 10 A line rated current, 100 kA breaking capacity at 400 V AC, 24 V AC coil, DIN rail mount.

Schneider Electric GV2P14KD09B7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P14KD09B7 — Identification
ParameterValue
Product rangeTeSys
Product/component typeMotor starter
GV2P14KD09B7 — Ratings
ParameterValue
Poles configuration3P
Breaking capacity100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2 100 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2 100 kA Icu 440 V AC 50/60 Hz IEC 60947-2 50 kA Icu 500 V AC 50/60 Hz IEC 60947-2 6 kA Icu 690 V AC 50/60 Hz IEC 60947-2
Rated operational voltage (Ue)Power circuit Power circuit 10 MOhm for signalling circuit
Rated insulation voltage (Ui)690 V AC 50/60 Hz IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV IEC 60947-2
Network frequency50/60 Hz IEC 60947-4-1
Utilisation categoryAC-4 AC-1 AC-3
GV2P14KD09B7 — Protection
ParameterValue
Electrical durability (cycles)100000 cycles AC-3 440 V
Mechanical durability (cycles)100000 cycles
GV2P14KD09B7 — Mechanical
ParameterValue
Control typeRotary knob
Terminal connection typescrew clamp terminals 2 0.002...0.009 in² (1...6 mm²) solid screw clamp terminals 2 0.002...0.009 in² (1.5...6 mm²) flexible without cable end screw clamp terminals 2 0.002...0.006 in² (1...4 mm²) flexible with cable end
Terminal tightening torque15.05 lbf.in (1.7 N.m) screw clamp terminals
Width1.8 in (45 mm)
Height3.5 in (89 mm)
Depth3.8 in (97 mm)
GV2P14KD09B7 — Environmental
ParameterValue
Operating ambient temperature23...140 °F (-5...60 °C)
Storage ambient temperature-76...176 °F (-60...80 °C)
IP degree of protectionIP20 IEC 60529
Pollution degree3
GV2P14KD09B7 — Approvals
ParameterValue
StandardsIEC 60947-2 UL 508 VDE 0113 NF C 79-130 NF C 63-650 IEC 60947-1 CSA C22.2 NF C 63-120 IEC 60947-4-1 VDE 0660 EN 60204
GV2P14KD09B7 — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % 690 V AC 50/60 Hz IEC 60947-2 100 % 500 V AC 50/60 Hz IEC 60947-2 100 % 230/240 V AC 50/60 Hz IEC 60947-2 100 % 440 V AC 50/60 Hz IEC 60947-2 100 % 400/415 V AC 50/60 Hz IEC 60947-2

Product details

Part identification and key ratings

The Schneider Electric TeSys GV2P14KD09B7 is a direct on-line motor starter combining a 3-pole circuit breaker and a contactor in one unit, rated for a line current of 10 A. It is designed for motor control applications across utilisation categories AC-1 (resistive), AC-3 (squirrel-cage motor starting/stopping), and AC-4 (plugging/inching). Motor power capability spans 2.2 to 3 kW at 380 to 440 V three-phase, and 4 to 6 kW at 480 to 500 V three-phase, with a 24 V AC control coil.

This motor starter holds compliance with IEC 60947-2, IEC 60947-4-1, UL 508, CSA C22.2, VDE 0660, and EN 60204, covering overcurrent protection and motor controller requirements for North American and European installations. Pollution degree 3 rating suits industrial environments with conductive contamination.

IP20 finger-safe protection is provided per IEC 60529. Screw clamp terminals accept 1 to 6 mm² solid or stranded wire; tightening torque is 1.7 N·m. The rotary knob control allows manual on/off/reset without opening the enclosure.

Durability and environmental withstand

Rated for 100,000 electrical cycles under AC-3 at 440 V, and 100,000 mechanical cycles. Vibration resistance is 2 Gn (contactor open) and 4 Gn (closed) across 5 to 300 Hz; shock resistance is 10 Gn open and 15 Gn closed for 11 ms. Climatic withstand per IACS and protective treatment TH for tropical environments. Fire resistance tested to 850 °C per IEC 60695-2-1, with flame retardance V1 per UL 94.

Frequently asked questions

What are the key ratings for this motor starter?

Line rated current is 10 A, breaking capacity is 100 kA Icu at 400/415 V AC per IEC 60947-2, and it covers motor power from 2.2 to 6 kW depending on supply voltage. The control coil is 24 V AC.

What standards does GV2P14KD09B7 comply with?

It complies with IEC 60947-2, IEC 60947-4-1, UL 508, CSA C22.2, VDE 0660, EN 60204, and related standards for overcurrent protection and motor control.

How is this motor starter mounted?

It clips onto a 35 mm symmetrical DIN rail or can be panel-mounted with two M4 screws. Dimensions are 89 x 45 x 97 mm (H x W x D).

MPN
GV2P14KD09B7