The Schneider Electric TeSys GV2P20KD25BL is a direct on-line motor starter combining a contactor and thermal-magnetic overload relay in a single 3-pole package. It is rated for continuous duty per IEC 60947-4-1 and carries a line rated current of 18 A. The IP20 degree of protection means it is suited for installation inside a cabinet, not exposed to washdown. It is designed for motor control and resistive loads, with utilisation categories AC-1, AC-3, and AC-4 covering resistive, squirrel-cage motor starting, and plugging/inching duties respectively.
The breaking capacity (Icu) per IEC 60947-2 is 100 kA at 230/240 V AC, 50 kA at 400/415 V AC, 20 kA at 440 V AC, 10 kA at 500 V AC, and 4 kA at 690 V AC. The magnetic tripping current is set at 223 A, providing short-circuit protection for the motor branch circuit. The 18 A line rated current sets the continuous ampacity for the thermal overload element. The control coil is 24 V DC low consumption, which is a common safety voltage for control circuits and reduces heat dissipation inside the panel compared to AC coils.
Standards Compliance and Lifecycle
This motor starter complies with UL 508, IEC 60947-1, IEC 60947-2, IEC 60947-4-1, CSA C22.2, and EN 60204, among others. This means it is accepted for use in North American and European installations without additional certification hurdles.