Skip to main content
Log in
Schneider Electric GV2P21KD25G7 — Miniature Circuit Breakers (MCB)

Schneider GV2P21KD25G7 TeSys motor starter, 23 A, 9 kW at 40

MPNGV2P21KD25G7
Obsolete

Schneider Electric TeSys GV2P21KD25G7, direct on-line motor starter, 3-pole, 23 A line rated current, 9 kW at 400 V AC, 100 kA breaking capacity, IP20, DIN rail mount.

Schneider Electric GV2P21KD25G7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

GV2P21KD25G7 — Identification
ParameterValue
Product rangeTeSys
Product/component typeMotor starter
GV2P21KD25G7 — Ratings
ParameterValue
Poles configuration3P
Breaking capacity100 kA Icu 230/240 V AC 50/60 Hz IEC 60947-2 10 kA Icu 500 V AC 50/60 Hz IEC 60947-2 4 kA Icu 690 V AC 50/60 Hz IEC 60947-2 20 kA Icu 440 V AC 50/60 Hz IEC 60947-2 50 kA Icu 400/415 V AC 50/60 Hz IEC 60947-2
Rated operational voltage (Ue)Power circuit Power circuit 10 MOhm for signalling circuit
Rated insulation voltage (Ui)690 V AC 50/60 Hz IEC 60947-2
Rated impulse withstand voltage (Uimp)6 kV IEC 60947-2
Network frequency50/60 Hz IEC 60947-4-1
Utilisation categoryAC-3 AC-4 AC-1
GV2P21KD25G7 — Protection
ParameterValue
Electrical durability (cycles)100000 cycles AC-3 440 V
Mechanical durability (cycles)100000 cycles
GV2P21KD25G7 — Mechanical
ParameterValue
Control typeRotary knob
Terminal connection typescrew clamp terminals 2 0.002...0.009 in² (1...6 mm²) solid screw clamp terminals 2 0.002...0.009 in² (1.5...6 mm²) flexible without cable end screw clamp terminals 2 0.002...0.006 in² (1...4 mm²) flexible with cable end
Terminal tightening torque15.05 lbf.in (1.7 N.m) screw clamp terminals
Width1.8 in (45 mm)
Height3.5 in (89 mm)
Depth3.8 in (97 mm)
GV2P21KD25G7 — Environmental
ParameterValue
Operating ambient temperature23...140 °F (-5...60 °C)
Storage ambient temperature-76...176 °F (-60...80 °C)
IP degree of protectionIP20 IEC 60529
Pollution degree3
GV2P21KD25G7 — Approvals
ParameterValue
StandardsIEC 60947-1 NF C 79-130 VDE 0113 UL 508 CSA C22.2 EN 60204 NF C 63-650 VDE 0660 IEC 60947-2 IEC 60947-4-1 NF C 63-120
GV2P21KD25G7 — Electrical
ParameterValue
[Ics] rated service short-circuit breaking capacity100 % 690 V AC 50/60 Hz IEC 60947-2 100 % 230/240 V AC 50/60 Hz IEC 60947-2 75 % 500 V AC 50/60 Hz IEC 60947-2 50 % 400/415 V AC 50/60 Hz IEC 60947-2 75 % 440 V AC 50/60 Hz IEC 60947-2

Product details

Motor starter for direct-on-line control

The Schneider Electric TeSys GV2P21KD25G7 is a direct on-line motor starter with a rotary knob control, rated for continuous duty per IEC 60947-4-1. It carries a line rated current of 23 A and delivers motor power of 9 kW at 400/415 V AC, 11 kW at 500 V AC, and 18.5 kW at 690 V AC — covering a motor power range of 7 to 11 kW at 380 to 440 V three-phase.

The IP20 finger-safe enclosure (IEC 60529) suits installation inside a control cabinet where the front panel is the operator interface. Screw-clamp terminals accept 1 to 6 mm² solid or 1.5 to 6 mm² flexible conductors; tighten to 1.7 N·m.

Compliant with IEC 60947-1, IEC 60947-2, IEC 60947-4-1, UL 508, CSA C22.2, EN 60204, and VDE 0660. Flame retardance V1 per UL 94; glow-wire tested to 850 °C per IEC 60695-2-1.

Frequently asked questions

What is the breaking capacity at 400 V?

50 kA Icu at 400/415 V AC per IEC 60947-2, which is the typical fault level for a 400 V industrial distribution panel.

What utilisation categories does it cover?

Rated for AC-3 (squirrel-cage motor starting), AC-4 (inching/plugging), and AC-1 (resistive load). The 23 A line rated current applies across these categories, but the electrical durability of 100,000 cycles at AC-3 440 V is the practical endurance figure for motor duty.

What is the magnetic tripping current?

327 A, which provides short-circuit protection for the motor branch circuit. The magnetic trip acts independently of the thermal overload.

MPN
GV2P21KD25G7