The Schneider Electric GV2P22KD25B7 is a TeSys-series direct on-line motor starter, combining a contactor and thermal/magnetic protection in a single 45 mm wide package. It clips onto 35 mm symmetrical DIN rail or mounts with two M4 screws. Rated at 25 A line current, it handles motor loads up to 11 kW at 400/415 V AC and 15 kW at 500 V AC, 50/60 Hz. The magnetic trip is set at 327 A. Breaking capacity reaches 100 kA at 230/240 V AC and 50 kA at 400/415 V AC, so it can interrupt high fault currents without upstream devices needing to clear the fault — a real advantage for panel coordination.
Where you'll use it
This is a motor starter for direct-on-line applications — common on conveyors, pumps, fans, and compressors where the motor runs at a fixed speed. The rotary knob gives local control; the 24 V AC coil allows remote PLC or relay switching. The IK04 impact rating handles incidental tool bumps during commissioning.
Listed to IEC 60947-2, IEC 60947-4-1, UL 508, CSA C22.2, and EN 60204. The V1 flame retardance (UL 94) and 850 °C glow-wire resistance (IEC 60695-2-1) matter for panel builders needing a compliance paper trail.