The GV2PC01 is an IP65-rated polycarbonate enclosure from the TeSys Deca frame 2 range, designed for TeSys GV2P breakers. It surface-mounts to a panel or machine frame, giving the breaker inside a sealed, washdown-capable housing. The black handle on the enclosure couples to the breaker's rotary operator, so you can still manually trip or reset the motor circuit without opening the lid. That IP65 rating means the enclosure and handle seal keep out dust and low-pressure water jets — suitable for food-processing lines, outdoor conveyor sections, or any area that gets hosed down.
At 166 mm high, 88 mm wide, and 163 mm deep, this enclosure takes up about the footprint of a standard DIN-rail breaker but adds the depth needed for the handle mechanism and cable entry. Plan for a 163 mm projection from the mounting surface — that depth is the full body, not including any gland or conduit fitting you add. Polycarbonate construction means no corrosion worries in wet or washdown environments, and it's lighter than a steel enclosure of the same size. Surface mounting with four screws is the intended method; there's no DIN-rail clip on this part.
As a TeSys Deca frame 2 accessory, it shares the mounting footprint and handle interface with the GV2P family.