It provides a red rotary handle with a yellow front plate, rated IP54 for protection against dust and splashing water in panel environments. The kit accommodates a back-to-door distance of 150 to 290 mm, which covers the typical panel-door offset for enclosures up to about 300 mm deep. The handle includes a padlocking provision in the OFF position, accepting one to three padlocks for lockout/tagout compliance. This is a control accessory — it does not contain the breaker mechanism itself, but provides the mechanical interface to operate the breaker from outside the enclosure.
Integration Notes
Mounting requires cutting a standard panel cutout for the rotary handle mechanism and aligning the shaft extension with the breaker's rotary actuator. The IP54 seal on the handle flange maintains the enclosure rating when properly gasketed. The 150-290 mm back/door range means the handle shaft must be ordered to match the actual door-to-breaker depth; verify this dimension against your enclosure before committing the part to the BOM.