Skip to main content
Log in
Schneider Electric ILA1R571TB1A0

Schneider ILA1R571TB1A0 Lexium integrated drive, 36 V, 0.26 N.m, 6 poles

MPNILA1R571TB1A0
Obsolete

Schneider ILA1R571TB1A0 — now discontinued, supplied from remaining surplus and broker stock.

$2,100.00Ref. price · indicative, final on quote
Schneider Electric ILA1R571TB1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILA1R571TB1A0 key specifications
ParameterValue
Motor typeAC Synchronous Servo Motor
Network typeDC
Winding typeHigh speed of rotation and medium torque
Feedback typeSingle turn encoder
Gear box typeWithout
Protection typeSafe torque off Overload of output voltage Short circuit of the output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...40 V
Discrete output voltage23...25 V

All specifications

ILA1R571TB1A0 additional specifications
ParameterValue
Supply voltage36 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption11000 mA peak 7500 mA maximum continuous
Discrete input current10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Communication interfaceRS485, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (5.2 mm)
Number of mounting holes4
Circle diameter of the mounting holes2.6 in (66.6 mm)
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.06 in (1.6 mm)
StandardsEN/IEC 61800-3 EN/IEC 50178 IEC 61800-3, Ed 2 EN 50347 IEC 60072-1 EN 61800-3:2001, second environment EN 61800-3 : 2001-02
Length5.7 in (145.3 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.8 in (20 mm)
Holding brakeWithout
Nominal speed5100 rpm 24 V 7500 rpm 36 V
Rotor inertia0.1 kg.cm²
Accuracy error+/- 0.05 °
Nominal torque2.30 lbf.in (0.26 N.m)
Shaft diameter0.4 in (9 mm)
Device short nameILA
Motor flange size2.2 in (57 mm)
Peak stall torque3.81 lbf.in (0.43 N.m)
Transmission rate9.6, 19.2 and 38.4 kbauds
Service life in hours20000 h bearing
Associated fuse rating10 A
Maximum axial force fa104 N force pressure) 104 N tensile force)
Number of motor stacks1
Continuous stall torque2.30 lbf.in (0.26 N.m)
Maximum radial force fr89 N
Centring collar diameter2.0 in (50 mm)
Speed feedback resolution16384 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation122...149 °F (50...65 °C) (with power derating of 2 % per °C) 32...122 °F (0...50 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILA1R571TB1A0 is a Schneider Lexium integrated drive combining an AC synchronous servo motor and drive electronics in one unit, rated for 0.26 N.m continuous torque at 36 V DC supply with 6 poles. It carries integrated RS485 communication at 9.6, 19.2 or 38.4 kbauds, a single-turn encoder resolving 16384 points per turn, and is sealed to IP41 at the shaft bushing and IP54 overall. Rated for 150 m/s² shock per EN/IEC 60068-2-29, it suits applications with mechanical vibration and impact loads.

Versus the BRS368H131ACA, the ILA1R571TB1A0 switches at 11.0 A compared to 5.8 A, but delivers lower torque at 0.26 N.m versus 1.5 N.m, and lacks a listed maximum speed — choose the ILA1R571TB1A0 when the load requires higher switching current and the torque demand stays under 0.26 N.m.

MPN
ILA1R571TB1A0