BOM / RFQ

Schneider Electric ILE1F661PC1A4

MPNILE1F661PC1A4

Active

Square D ILE1F661PC1A4 Integrated Drive/Motor|Square D ILE1F661PC1A4 Integrated Drive/Motor

$2,430.00Ref. price · indicative, final on quote

Add to RFQ

Schneider Electric ILE1F661PC1A4 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILE1F661PC1A4 key specifications
Parameter	Value
Motor type	Brushless DC motor
Network type	DC
Winding type	Medium speed of rotation and medium torque
Feedback type	BLDC encoder
Gear box type	Straight teeth gear, 4 stages
Protection type	Safe torque off Short circuit of the output voltage Overload of output voltage
Type of cooling	Natural convection
Range of product	Lexium integrated drive
Input (output type)	4 signals (each be used as input or output)
Product or component type	Motion integrated drive
Supply voltage limits	18...40 V
Discrete output voltage	23...25 V

All specifications

ILE1F661PC1A4 additional specifications
Parameter	Value
Supply voltage	36 V 24 V
Voltage state 0 guaranteed	-3...4.5 V
Voltage state 1 guaranteed	15...30 V
Current consumption	7000 mA peak 5500 mA maximum continuous
Discrete input current	10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface
Maximum supply current	0.06 A 36 V power stage disabled) 0.1 A 24 V power stage disabled) 2.1 A 36 V 2.6 A 24 V
Maximum switching current	100 mA per output 200 mA total
Nominal output power	38 W 24 V 48 W 36 V
Number of motor poles	6
Phases	Single phase
IP degree of protection	IP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5
Communication interface	CANopen DS301, Integrated
Mounting support	Flange
Mounting holes diameter	0.2 in (4.4 mm)
Number of mounting holes	4
Circle diameter of the mounting holes	2.90 in (73.54 mm)
Electrical connection	Industrial connector
Shock resistance	150 m/s² 1000 shocks IEC 60068-2-29
Relative humidity	15...85 % without condensation
Operating altitude	<= 3280.84 ft (1000 m) without derating
Vibration resistance	20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6
Key width	0.6 in (16 mm)
Centring collar depth	0.2 in (4 mm)
Standards	IEC 61800-3 IEC 61800-3, Ed 2 IEC 60072-1 EN 61800-3:2001, second environment EN 61800-3 : 2001-02 IEC 50347 IEC 50178
Length	6.9 in (174 mm)
Marking	CE
Category	US1PC5618288
Shaft end	Keyed
Second shaft	Without second shaft end
Shaft length	1.0 in (25 mm)
Detent torque	70.8 lbf.in (8 N.m)
Holding brake	Without
Nominal speed	35 rpm 24 V 42 rpm 36 V
Rotor inertia	1962 kg.cm²
Accuracy error	+/- 1 point
Nominal torque	88.5 lbf.in (10 N.m) 24 V 97.4 lbf.in (11 N.m) 36 V
Shaft diameter	0.4 in (10 mm)
Reduction ratio	115:1 (3675:32)
Device short name	ILE
Motor flange size	2.6 in (66 mm)
Peak stall torque	132.32 lbf.in (14.95 N.m) 24 V 183.2 lbf.in (20.7 N.m) 36 V
Transmission rate	50, 100, 125, 250, 500, 800 and 1000 kbauds
Service life in hours	2500 h bearing short-term operation 15000 h bearing long-term operation
Associated fuse rating	10 A
Maximum axial force fa	10 N long-term operation) 80 N short-term operation)
Number of motor stacks	1
Continuous stall torque	123.9 lbf.in (14 N.m)
Maximum radial force fr	200 N long-term operation) 200 N short-term operation)
Centring collar diameter	0.6 in (16 mm)
Maximum mechanical speed	44 rpm
Speed feedback resolution	12 points/turn motor 0.26° gearbox output
Maximum torsional backlash	1 °
Ambient air temperature for storage	-13...158 °F (-25...70 °C)
Ambient air temperature for operation	122...149 °F (50...65 °C) (with power derating of 2 % per °C) 32...122 °F (0...50 °C) (without derating)
Permissible ambient air temperature around the device	221 °F (105 °C) power amplifier 230 °F (110 °C) motor