Schneider Electric ILE1R661PB1A8
MPNILE1R661PB1A8
Obsolete
Square D ILE1R661PB1A8 Integrated Drive/Motor|Square D ILE1R661PB1A8 Integrated Drive/Motor
$1,620.00Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Motor type | Brushless DC motor |
| Network type | DC |
| Winding type | Medium speed of rotation and medium torque |
| Feedback type | BLDC encoder |
| Gear box type | Worm gear, 3 stages |
| Protection type | Safe torque off Overload of output voltage Short circuit of the output voltage |
| Type of cooling | Natural convection |
| Range of product | Lexium integrated drive |
| Input (output type) | 4 signals (each be used as input or output) |
| Product or component type | Motion integrated drive |
| Supply voltage limits | 18...40 V |
| Discrete output voltage | 23...25 V |
All specifications
| Parameter | Value |
|---|---|
| Supply voltage | 24 V 36 V |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Current consumption | 7000 mA peak 5500 mA maximum continuous |
| Discrete input current | 10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface |
| Maximum supply current | 0.1 A power stage disabled) 6.8 A 24 V 3.8 A 36 V |
| Maximum switching current | 100 mA per output 200 mA total |
| Nominal output power | 37 W 24 V 39 W 36 V |
| Number of motor poles | 6 |
| Phases | Single phase |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Communication interface | RS485, Integrated |
| Mounting support | Flange |
| Mounting holes diameter | 0.2 in (4.4 mm) |
| Number of mounting holes | 2 |
| Electrical connection | Printed circuit board connector |
| Shock resistance | 150 m/s² 1000 shocks IEC 60068-2-29 |
| Relative humidity | 15...85 % without condensation |
| Operating altitude | <= 3280.84 ft (1000 m) without derating |
| Vibration resistance | 20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6 |
| Standards | IEC 60072-1 EN 61800-3 : 2001-02 IEC 50347 IEC 61800-3, Ed 2 EN 61800-3:2001, second environment IEC 61800-3 IEC 50178 |
| Length | 9.02 in (229 mm) |
| Marking | CE |
| Category | US1PC5618288 |
| Shaft end | Hole |
| Second shaft | Without second shaft end |
| Detent torque | 147.8 lbf.in (16.7 N.m) |
| Holding brake | Without |
| Nominal speed | 35 rpm 24 V 35 rpm 36 V |
| Rotor inertia | 1980 kg.cm² |
| Accuracy error | +/- 1 point |
| Nominal torque | 90.3 lbf.in (10.2 N.m) 24 V 93.8 lbf.in (10.6 N.m) 36 V |
| Reduction ratio | 115:1 (3675:32) |
| Device short name | ILE |
| Motor flange size | 2.6 in (66 mm) |
| Peak stall torque | 132.32 lbf.in (14.95 N.m) 24 V 183.2 lbf.in (20.7 N.m) 36 V |
| Transmission rate | 9.6, 19.2 and 38.4 kbauds |
| Service life in hours | 9000 h bearing |
| Associated fuse rating | 10 A |
| Maximum axial force fa | 80 N |
| Number of motor stacks | 1 |
| Continuous stall torque | 123.9 lbf.in (14 N.m) |
| Maximum radial force fr | 200 N |
| Centring collar diameter | 1.4 in (36 mm) |
| Maximum mechanical speed | 44 rpm |
| Speed feedback resolution | 12 points/turn motor 0.26° gearbox output |
| Maximum torsional backlash | 1 ° |
| Ambient air temperature for storage | -13...158 °F (-25...70 °C) |
| Ambient air temperature for operation | 122...149 °F (50...65 °C) (with power derating of 2 % per °C) 32...122 °F (0...50 °C) (without derating) |
| Permissible ambient air temperature around the device | 221 °F (105 °C) power amplifier 230 °F (110 °C) motor |
MPN
ILE1R661PB1A8