Schneider ILE1R661PC1A3 Square D Integrated Bldc — now discontinued, supplied from remaining surplus and broker stock.
| Parameter | Value |
|---|---|
| Motor type | Brushless DC motor |
| Network type | DC |
| Winding type | Medium speed of rotation and medium torque |
| Feedback type | BLDC encoder |
| Gear box type | Straight teeth gear, 4 stages |
| Protection type | Safe torque off Overload of output voltage Short circuit of the output voltage |
| Type of cooling | Natural convection |
| Range of product | Lexium integrated drive |
| Input (output type) | 4 signals (each be used as input or output) |
| Product or component type | Motion integrated drive |
| Supply voltage limits | 18...40 V |
| Discrete output voltage | 23...25 V |
| Parameter | Value |
|---|---|
| Supply voltage | 36 V 24 V |
| Voltage state 0 guaranteed | -3...4.5 V |
| Voltage state 1 guaranteed | 15...30 V |
| Current consumption | 7000 mA peak 5500 mA maximum continuous |
| Discrete input current | 10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface |
| Maximum supply current | 0.06 A 36 V power stage disabled) 0.1 A 24 V power stage disabled) 3.5 A 36 V 4.3 A 24 V |
| Maximum switching current | 100 mA per output 200 mA total |
| Nominal output power | 73 W 24 V 88 W 36 V |
| Number of motor poles | 6 |
| Phases | Single phase |
| IP degree of protection | IP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5 |
| Communication interface | RS485, Integrated |
| Mounting support | Flange |
| Mounting holes diameter | 0.2 in (4.4 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 2.90 in (73.54 mm) |
| Electrical connection | Industrial connector |
| Shock resistance | 150 m/s² 1000 shocks IEC 60068-2-29 |
| Relative humidity | 15...85 % without condensation |
| Operating altitude | <= 3280.84 ft (1000 m) without derating |
| Vibration resistance | 20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6 |
| Key width | 0.6 in (16 mm) |
| Centring collar depth | 0.2 in (4 mm) |
| Standards | IEC 50347 IEC 61800-3, Ed 2 IEC 61800-3 IEC 60072-1 EN 61800-3:2001, second environment EN 61800-3 : 2001-02 IEC 50178 |
| Length | 6.9 in (174 mm) |
| Marking | CE |
| Category | US1PC5618288 |
| Shaft end | Keyed |
| Second shaft | Without second shaft end |
| Shaft length | 1.0 in (25 mm) |
| Detent torque | 29.2 lbf.in (3.3 N.m) |
| Holding brake | Without |
| Nominal speed | 73 rpm 24 V 88 rpm 36 V |
| Rotor inertia | 441 kg.cm² |
| Accuracy error | +/- 1 point |
| Nominal torque | 88.5 lbf.in (10 N.m) 36 V 84.08 lbf.in (9.5 N.m) 24 V |
| Shaft diameter | 0.4 in (10 mm) |
| Reduction ratio | 54:1 (490:9) |
| Device short name | ILE |
| Motor flange size | 2.6 in (66 mm) |
| Peak stall torque | 111.87 lbf.in (12.64 N.m) 24 V 35.4 lbf.in (4 N.m) 36 V |
| Transmission rate | 9.6, 19.2 and 38.4 kbauds |
| Service life in hours | 2500 h bearing short-term operation 15000 h bearing long-term operation |
| Associated fuse rating | 10 A |
| Maximum axial force fa | 10 N long-term operation) 80 N short-term operation) |
| Number of motor stacks | 1 |
| Continuous stall torque | 101.8 lbf.in (11.5 N.m) |
| Maximum radial force fr | 200 N long-term operation) 200 N short-term operation) |
| Centring collar diameter | 0.6 in (16 mm) |
| Maximum mechanical speed | 92 rpm |
| Speed feedback resolution | 12 points/turn motor 0.55° gearbox output |
| Maximum torsional backlash | 1 ° |
| Ambient air temperature for storage | -13...158 °F (-25...70 °C) |
| Ambient air temperature for operation | 122...149 °F (50...65 °C) (with power derating of 2 % per °C) 32...122 °F (0...50 °C) (without derating) |
| Permissible ambient air temperature around the device | 221 °F (105 °C) power amplifier 230 °F (110 °C) motor |
The ILE1R661PC1A3 is a Schneider Lexium integrated brushless DC drive delivering 10 N.m at 36 V or 9.5 N.m at 24 V, with a rated speed of 92 rpm and a 6-pole motor winding. It carries CE marking, an IP41 shaft bushing and IP54 total enclosure, and integrates an RS485 interface for control.
No related articles