Skip to main content
Log in
Schneider Electric ILE1R661PC1A8

Schneider ILE1R661PC1A8 Lexium integrated drive, 10.2 N.m, 44 rpm

MPNILE1R661PC1A8
Obsolete

Schneider Electric Lexium integrated drive ILE1R661PC1A8, brushless DC motor, 10.2 N.m torque at 24 V, 44 rpm, 6-pole, RS485, worm gear 115:1, IP41/IP54, CE.

$2,765.00Ref. price · indicative, final on quote
Schneider Electric ILE1R661PC1A8 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILE1R661PC1A8 key specifications
ParameterValue
Motor typeBrushless DC motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeBLDC encoder
Gear box typeWorm gear, 3 stages
Protection typeSafe torque off Short circuit of the output voltage Overload of output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...40 V
Discrete output voltage23...25 V

All specifications

ILE1R661PC1A8 additional specifications
ParameterValue
Supply voltage24 V 36 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption7000 mA peak 5500 mA maximum continuous
Discrete input current10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface
Maximum supply current0.1 A power stage disabled) 6.8 A 24 V 3.8 A 36 V
Maximum switching current100 mA per output 200 mA total
Nominal output power37 W 24 V 39 W 36 V
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5
Communication interfaceRS485, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (4.4 mm)
Number of mounting holes2
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6
StandardsEN 61800-3 : 2001-02 IEC 61800-3, Ed 2 IEC 60072-1 IEC 50347 EN 61800-3:2001, second environment IEC 50178 IEC 61800-3
Length9.02 in (229 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endHole
Second shaftWithout second shaft end
Detent torque147.8 lbf.in (16.7 N.m)
Holding brakeWithout
Nominal speed35 rpm 24 V 35 rpm 36 V
Rotor inertia1980 kg.cm²
Accuracy error+/- 1 point
Nominal torque90.3 lbf.in (10.2 N.m) 24 V 93.8 lbf.in (10.6 N.m) 36 V
Reduction ratio115:1 (3675:32)
Device short nameILE
Motor flange size2.6 in (66 mm)
Peak stall torque132.32 lbf.in (14.95 N.m) 24 V 183.2 lbf.in (20.7 N.m) 36 V
Transmission rate9.6, 19.2 and 38.4 kbauds
Service life in hours9000 h bearing
Associated fuse rating10 A
Maximum axial force fa80 N
Number of motor stacks1
Continuous stall torque123.9 lbf.in (14 N.m)
Maximum radial force fr200 N
Centring collar diameter1.4 in (36 mm)
Maximum mechanical speed44 rpm
Speed feedback resolution12 points/turn motor 0.26° gearbox output
Maximum torsional backlash1 °
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation122...149 °F (50...65 °C) (with power derating of 2 % per °C) 32...122 °F (0...50 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILE1R661PC1A8 is a Schneider Lexium integrated drive combining a brushless DC motor with a 3-stage worm gearbox at a 115:1 reduction, delivering 10.2 N.m at 24 V and a rated speed of 44 rpm. It carries a 6-pole winding, RS485 communication at 9.6 to 38.4 kbaud, and is sealed to IP41 at the shaft bushing and IP54, with CE marking per EN 61800-3.

The 10.2 N.m continuous torque at 24 V (10.6 N.m at 36 V) and 44 rpm output suit low-speed, high-torque positioning or indexing applications where a separate gearmotor would add panel space. Its shock rating of 150 m/s² over 1000 shocks per IEC 60068-2-29 confirms it can handle intermittent mechanical loads without derating.

MPN
ILE1R661PC1A8