Skip to main content
Log in
Schneider Electric ILS1F853PC1F0

Schneider ILS1F853PC1F0 Lexium integrated drive, 6 poles, 24 V DC, CANopen

MPNILS1F853PC1F0
Obsolete

Schneider ILS1F853PC1F0 — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$3,570.00Ref. price · indicative, final on quote
Schneider Electric ILS1F853PC1F0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS1F853PC1F0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeOverload of output voltage Short circuit of the output voltage Safe torque off
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...40 V
Discrete output voltage23...25 V

All specifications

ILS1F853PC1F0 additional specifications
ParameterValue
Supply voltage24 V 36 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption5000 mA maximum
Discrete input current10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Brake pull-in power22 W
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Communication interfaceCANopen DS301, Integrated
Mounting supportFlange
Mounting holes diameter0.3 in (6.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.9 in (99 mm)
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.08 in (2 mm)
StandardsEN 61800-3 : 2001-02 EN/IEC 61800-3 EN/IEC 50178 IEC 61800-3, Ed 2 EN 50347 IEC 60072-1 EN 61800-3:2001, second environment
Length9.7 in (247.3 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWith
Nominal speed120 rpm 36 V 60 rpm 24 V
Rotor inertia3.5 kg.cm²
Accuracy error+/- 6 arc min
Holding torque53.1 lbf.in (6 N.m) holding brake 53.1 lbf.in (6 N.m)
Nominal torque53.1 lbf.in (6 N.m)
Shaft diameter0.6 in (14 mm)
Device short nameILS
Motor flange size3.3 in (85 mm)
Peak stall torque53.1 lbf.in (6 N.m)
Transmission rate50, 100, 125, 250, 500, 800 and 1000 kbauds
Brake release time40 ms
Service life in hours20000 h bearing
Associated fuse rating10 A
Brake application time20 ms
Maximum axial force fa170 N tensile force) 30 N force pressure)
Number of motor stacks3
Continuous stall torque53.1 lbf.in (6 N.m)
Maximum radial force fr110 N
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed1000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation122...149 °F (50...65 °C) (with power derating of 2 % per °C) 32...122 °F (0...50 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS1F853PC1F0 is a Schneider Lexium integrated drive combining a 3-phase stepper motor and drive electronics in one housing, order code ILS1F853PC1F0. It delivers 6 N.m of holding torque from a 24 V DC supply, communicates via CANopen DS301, and carries CE marking for the European market. Rated IP41, the unit is suited for cabinet or machine-mount applications where splash protection is not required. The 6-pole stepper motor provides 20000 points per turn resolution, with an index pulse for homing.

This integrated drive packages the stepper motor, encoder feedback, and CANopen fieldbus interface into a single flange-mount assembly. The 6 N.m holding torque covers positioning axes on small pick-and-place cells, labelers, and conveyor diverters without an external gearbox. CANopen DS301 carries motion commands and status at up to 1 Mbit/s; the four configurable I/O signals can serve as limit switches, proximity sensors, or brake control. The integrated holding brake holds the load at power-off — useful for vertical axes. Rotor inertia of 3.5 kg·cm² and an accuracy of ±6 arc minutes define the dynamic response and positioning repeatability. The drive includes overload and short-circuit protection on the output voltage, plus Safe Torque Off (STO) for safe stop under EN/IEC 61800-3.

Applications

Lexium integrated drives of this class are used in packaging machinery, textile equipment, and assembly stations where a compact stepper axis with fieldbus control replaces a separate drive and motor pair. The 24 V DC supply suits battery-backed or low-voltage control cabinets. The IP41 rating limits the drive to dry indoor environments; it is not intended for washdown or dust-laden areas. Typical mounting is on a machine frame or DIN-rail adapter plate.

The ILS1F853PC1F0 is an active Schneider product. No end-of-life notification or last-time-buy date is recorded. Standard lead times apply; confirm current availability and minimum order quantity on the RFQ. Compliance documentation includes CE marking per the Low Voltage and EMC directives. The drive meets EN 61800-3 for conducted and radiated emissions in the second environment (industrial). No UL or CSA listing is noted in the available documentation.

MPN
ILS1F853PC1F0