Skip to main content
Log in
Schneider Electric ILS1M852PB1F0

Schneider ILS1M852PB1F0 Lexium integrated drive stepper motor, 36 V, 6 poles

MPNILS1M852PB1F0
Obsolete

Schneider ILS1M852PB1F0 — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$1,580.00Ref. price · indicative, final on quote
Schneider Electric ILS1M852PB1F0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS1M852PB1F0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeOverload of output voltage Short circuit of the output voltage Safe torque off
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...40 V
Discrete output voltage10...30 V

All specifications

ILS1M852PB1F0 additional specifications
ParameterValue
Supply voltage36 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption5000 mA maximum continuous
Discrete input current10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 10 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Brake pull-in power22 W
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 9.6, 19.2 and 38.4 kbauds)
Communication interfaceI/O for motion sequence, Integrated
Mounting supportFlange
Mounting holes diameter0.3 in (6.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.9 in (99 mm)
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.08 in (2 mm)
StandardsIEC 61800-3, Ed 2 EN 50347 IEC 60072-1 EN/IEC 50178 EN/IEC 61800-3 EN 61800-3:2001, second environment EN 61800-3 : 2001-02
Length8.6 in (217.3 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWith
Nominal speed100 rpm 24 V 200 rpm 36 V
Rotor inertia2.4 kg.cm²
Accuracy error+/- 6 arc min
Holding torque53.1 lbf.in (6 N.m) holding brake 35.4 lbf.in (4 N.m)
Nominal torque35.4 lbf.in (4 N.m)
Shaft diameter0.5 in (12 mm)
Device short nameILS
Motor flange size3.3 in (85 mm)
Peak stall torque35.4 lbf.in (4 N.m)
Transmission rate9.6, 19.2 and 38.4 kbauds
Brake release time40 ms
Service life in hours20000 h bearing
Associated fuse rating10 A
Brake application time20 ms
Maximum axial force fa170 N tensile force) 30 N force pressure)
Number of motor stacks2
Continuous stall torque35.4 lbf.in (4 N.m)
Maximum radial force fr100 N
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed1500 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation122...149 °F (50...65 °C) (with power derating of 2 % per °C) 32...122 °F (0...50 °C) (without derating)
Permissible ambient air temperature around the device230 °F (110 °C) motor

Product details

Overview

The ILS1M852PB1F0 is a Schneider Lexium integrated drive stepper motor, order code ILS1M852PB1F0, rated 36 V DC single-phase supply with 6 poles and 4 N.m holding torque. It includes a holding brake, index pulse feedback, and RS485 communication at 9.6, 19.2, and 38.4 kbaud. The motor is CE marked and carries an IP41 enclosure rating. This part is in active production.

Schneider lists the ILS1M852PB1F0 as an active, current-production part. For a BOM freeze or line-down need, an RFQ is the fastest path to confirm lead time and available quantity. The integrated drive design simplifies panel wiring by combining the motor and drive electronics in one unit, reducing cabinet space and cabling compared to a separate drive-and-motor pair.

MPN
ILS1M852PB1F0