Skip to main content
Log in
Schneider Electric ILS1R572PC1A0

Schneider ILS1R572PC1A0 Lexium Integrated Drive, 6-pole, 36 V

MPNILS1R572PC1A0
Active

Schneider ILS1R572PC1A0 Telemecanique Snap Switch — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$980.00 – $2,830.00Ref. price · indicative, final on quote
Schneider Electric ILS1R572PC1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS1R572PC1A0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeSafe torque off Overload of output voltage Short circuit of the output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...40 V
Discrete output voltage23...25 V

All specifications

ILS1R572PC1A0 additional specifications
ParameterValue
Supply voltage36 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption3500 mA maximum
Discrete input current10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5
Communication interfaceRS485, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (5.2 mm)
Number of mounting holes4
Circle diameter of the mounting holes2.6 in (66.6 mm)
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6
Centring collar depth0.06 in (1.6 mm)
StandardsIEC 60072-1 IEC 61800-3 IEC 61800-3, Ed 2 EN 61800-3:2001, second environment IEC 50347 EN 61800-3 : 2001-02 IEC 50178
Length4.6 in (115.9 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.8 in (21 mm)
Holding brakeWithout
Nominal speed300 rpm 24 V 600 rpm 36 V
Rotor inertia0.22 kg.cm²
Accuracy error+/- 6 arc min
Holding torque9.03 lbf.in (1.02 N.m)
Nominal torque8.0 lbf.in (0.9 N.m)
Shaft diameter0.25 in (6.35 mm)
Device short nameILS
Motor flange size2.2 in (57 mm)
Peak stall torque8.0 lbf.in (0.9 N.m)
Transmission rate9.6, 19.2 and 38.4 kbauds
Service life in hours20000 h bearing
Associated fuse rating10 A
Maximum axial force fa100 N tensile force) 8.4 N force pressure)
Number of motor stacks2
Continuous stall torque8.0 lbf.in (0.9 N.m)
Maximum radial force fr24 N
Centring collar diameter1.5 in (38.1 mm)
Maximum mechanical speed3000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation122...149 °F (50...65 °C) (with power derating of 2 % per °C) 32...122 °F (0...50 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS1R572PC1A0 is a Schneider Lexium integrated drive combining a 6-pole single-phase stepper motor and drive electronics in one housing, rated for 36 V DC supply and delivering a holding torque of 8.0 lbf.in (0.9 N.m). It carries an IP41 rating for drip-proof cabinet mounting via flange, and is specified to withstand 150 m/s² shock over 1000 shocks per IEC 60068-2-29.

This integrated drive uses a 3-phase stepper motor with a medium-speed, medium-torque winding profile. The on-board RS485 port supports transmission rates of 9.6, 19.2 and 38.4 kbauds, allowing direct connection to a motion controller without an external drive module. Positioning accuracy is rated at ±6 arc minutes, with a rotor inertia of 0.22 kg·cm². The drive includes safe torque off, overload of output voltage, and short circuit of output voltage protection. Speed is limited to 300 rpm at 24 V and 600 rpm at 36 V.

Applications

Integrated stepper drives of this class are used in pick-and-place stations, label applicators, small conveyor indexing, and other motion axes where space is tight and a separate drive would add cabinet volume. The RS485 interface fits multi-drop networks common in packaging and assembly lines.

Pricing & sourcing

Pricing for the ILS1R572PC1A0 is not published on this page. As a specialty integrated drive, it is sourced to order. Request a quote for current pricing, MOQ, and estimated delivery.

MPN
ILS1R572PC1A0