Skip to main content
Log in
Schneider Electric ILS1R853TC1A0

Schneider ILS1R853TC1A0 Lexium Integrated Drive, 6 poles, 24 V DC

MPNILS1R853TC1A0
Obsolete

Schneider ILS1R853TC1A0 Telemecanique 48V Proximity Sensor — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$1,286.00 – $1,520.00Ref. price · indicative, final on quote
Schneider Electric ILS1R853TC1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS1R853TC1A0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeHigh speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeSafe torque off Overload of output voltage Short circuit of the output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...40 V
Discrete output voltage23...25 V

All specifications

ILS1R853TC1A0 additional specifications
ParameterValue
Supply voltage24 V 36 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption6000 mA maximum
Discrete input current10 mA at 24 V on/STO_A safety input 3 mA at 24 V on/STO_B safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5
Communication interfaceRS485, Integrated
Mounting supportFlange
Mounting holes diameter0.3 in (6.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.9 in (99 mm)
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6
Centring collar depth0.08 in (2 mm)
StandardsIEC 50178 IEC 61800-3 IEC 61800-3, Ed 2 EN 61800-3 : 2001-02 EN 61800-3:2001, second environment IEC 50347 IEC 60072-1
Length7.9 in (200.6 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWithout
Nominal speed100 rpm 24 V 300 rpm 36 V
Rotor inertia3.3 kg.cm²
Accuracy error+/- 6 arc min
Holding torque39.8 lbf.in (4.5 N.m)
Nominal torque39.8 lbf.in (4.5 N.m)
Shaft diameter0.6 in (14 mm)
Device short nameILS
Motor flange size3.3 in (85 mm)
Peak stall torque39.8 lbf.in (4.5 N.m)
Transmission rate9.6, 19.2 and 38.4 kbauds
Service life in hours20000 h bearing
Associated fuse rating10 A
Maximum axial force fa170 N tensile force) 30 N force pressure)
Number of motor stacks3
Continuous stall torque39.8 lbf.in (4.5 N.m)
Maximum radial force fr110 N
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed2000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation122...149 °F (50...65 °C) (with power derating of 2 % per °C) 32...122 °F (0...50 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS1R853TC1A0 is a Schneider Lexium integrated drive, a 3-phase stepper motor with 6 poles, rated for 24 V DC supply and delivering 4.5 Nm of torque. It carries an IP41 rating for in-cabinet use and is CE marked per IEC 61800-3.

This integrated drive combines a 3-phase stepper motor and control electronics in one housing, simplifying wiring and panel layout. The 6-pole design provides smooth low-speed torque, while the holding torque of 4.5 Nm handles moderate direct-drive loads without a gearbox. Positioning accuracy is rated at +/- 6 arc minutes, suitable for pick-and-place or indexing applications that do not require servo-level precision. Rotor inertia of 3.3 kg·cm² and winding resistance of 20.0 ohms define the dynamic response and thermal behaviour under load.

Applications

Lexium integrated drives of this class are used in compact automation cells — labelling machines, small conveyors, pick-and-place stations, and packaging equipment where space is tight and a separate drive cabinet is impractical. The integrated RS485 port at 9.6, 19.2 or 38.4 kbauds connects to a PLC or motion controller over a multi-drop network.

Within Schneider's Lexium range, the ILS1R853TC1A0 sits in the integrated drive family (device short name ILS), targeting machine builders who want a stepper solution with a single order code rather than matching a separate drive and motor. It competes on simplicity of integration and panel space, not on peak torque or speed.

Pricing & sourcing

The ILS1R853TC1A0 is an active Lexium product normally sourced to order; confirm current lead time and minimum order on the quote.

MPN
ILS1R853TC1A0