Skip to main content
Log in
Schneider Electric ILS2D852PC1F0

Schneider ILS2D852PC1F0 Lexium Integrated Stepper Drive, 6-pole, 24 V DC

MPNILS2D852PC1F0
Obsolete

Schneider ILS2D852PC1F0 — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$2,104.00Ref. price · indicative, final on quote
Schneider Electric ILS2D852PC1F0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS2D852PC1F0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeSafe torque off Short circuit of the output voltage Overload of output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55 V
Discrete output voltage23...25 V

All specifications

ILS2D852PC1F0 additional specifications
ParameterValue
Supply voltage24 V 48 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption5000 mA maximum continuous
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Brake pull-in power22 W
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceDeviceNet, Integrated
Mounting supportFlange
Mounting holes diameter0.3 in (6.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.9 in (99 mm)
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.08 in (2 mm)
StandardsEN/IEC 61800-3 EN/IEC 50178 EN 61800-3:2001, second environment EN 50347 IEC 60072-1 EN 61800-3 : 2001-02 IEC 61800-3, Ed 2
Length8.6 in (217.3 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWith
Nominal speed180 rpm 24 V 360 rpm 48 V
Rotor inertia2.4 kg.cm²
Accuracy error+/- 6 arc min
Holding torque53.1 lbf.in (6 N.m) holding brake 35.4 lbf.in (4 N.m)
Nominal torque35.4 lbf.in (4 N.m)
Shaft diameter0.5 in (12 mm)
Device short nameILS
Motor flange size3.3 in (85 mm)
Peak stall torque35.4 lbf.in (4 N.m)
Transmission rate125, 250, 500 kbauds
Brake release time40 ms
Service life in hours20000 h bearing
Associated fuse rating16 A
Brake application time20 ms
Maximum axial force fa170 N tensile force) 30 N force pressure)
Number of motor stacks2
Continuous stall torque35.4 lbf.in (4 N.m)
Maximum radial force fr100 N
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed3000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS2D852PC1F0 is a Schneider Lexium integrated drive combining a 3-phase stepper motor and drive electronics in a single housing, order code ILS2D852PC1F0. The unit is rated IP41 for in-cabinet mounting and carries CE marking per EN/IEC 61800-3 and EN/IEC 50178.

This integrated drive contains both the stepper motor and the control electronics, eliminating separate cabling and panel space for a drive module. The 6-pole 3-phase stepper motor provides 4 N.m holding torque with a rotor inertia of 2.4 kg.cm², suited for positioning applications requiring moderate torque and medium speed. The DeviceNet interface handles network control and feedback via an index pulse encoder, with RS485 Modbus TCP available at 9.6, 19.2, and 38.4 kbaud for configuration. Protection includes safe torque off, short-circuit and overload protection on the output voltage. The motor's step accuracy is ±6 arc min, and the holding brake is integrated. Rated shock resistance is 150 m/s² over 1000 shocks per EN/IEC 60068-2-29, making it suitable for machinery with moderate vibration.

Applications

Lexium integrated drives of this class are used in packaging, labeling, pick-and-place, and material handling equipment where a compact, networked stepper axis is needed. The DeviceNet interface allows direct connection to PLC-based motion control systems without an external motion controller. The IP41 rating limits installation to clean, dry cabinets.

The ILS2D852PC1F0 carries CE marking and complies with EN/IEC 61800-3 (second environment) and EN/IEC 50178. No official lifecycle status (active, NRND, or discontinued) is listed in the available evidence. For current production status and lead time, request a firm quote via RFQ.

MPN
ILS2D852PC1F0