Skip to main content
Log in
Schneider Electric ILS2E573PB1A0

Schneider ILS2E573PB1A0 Lexium Integrated Drive, 6-pole, 1.5 Nm, EtherCAT

MPNILS2E573PB1A0
Obsolete

Schneider ILS2E573PB1A0 Square D Servo Motor — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$1,114.00 – $2,000.00Ref. price · indicative, final on quote
Schneider Electric ILS2E573PB1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS2E573PB1A0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeSafe torque off Short circuit of the output voltage Overload of output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55 V
Discrete output voltage23...25 V

All specifications

ILS2E573PB1A0 additional specifications
ParameterValue
Supply voltage48 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption3500 mA maximum continuous
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceEtherCAT, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (5.2 mm)
Number of mounting holes4
Circle diameter of the mounting holes2.6 in (66.6 mm)
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.06 in (1.6 mm)
StandardsEN 61800-3:2001, second environment IEC 60072-1 EN 61800-3 : 2001-02 EN/IEC 50178 IEC 61800-3, Ed 2 EN 50347 EN/IEC 61800-3
Length5.5 in (138.9 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.8 in (21 mm)
Holding brakeWithout
Nominal speed300 rpm 24 V 600 rpm 48 V
Rotor inertia0.38 kg.cm²
Accuracy error+/- 6 arc min
Holding torque13.3 lbf.in (1.5 N.m)
Nominal torque13.3 lbf.in (1.5 N.m)
Shaft diameter0.3 in (8 mm)
Device short nameILS
Motor flange size2.2 in (57 mm)
Peak stall torque13.3 lbf.in (1.5 N.m)
Transmission rate100 Mbits
Service life in hours20000 h bearing
Associated fuse rating16 A
Maximum axial force fa100 N tensile force) 8.4 N force pressure)
Number of motor stacks3
Continuous stall torque13.3 lbf.in (1.5 N.m)
Maximum radial force fr50 N
Centring collar diameter1.5 in (38.1 mm)
Maximum mechanical speed3000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS2E573PB1A0 is a Schneider Lexium integrated drive, a 3-phase stepper motor with 6 poles rated at 1.5 N.m torque, operating on a 48 V DC supply and communicating via EtherCAT. It carries CE marking and is rated IP41 for flange mounting in cabinet environments.

This integrated drive combines a 3-phase stepper motor and drive electronics in one housing, eliminating separate cabling and panel space for a drive module. The 6-pole motor delivers 1.5 N.m of holding torque, suitable for positioning axes with moderate load inertia. Feedback is via an index pulse, giving a single-turn reference for homing sequences. EtherCAT is the primary fieldbus, with RS485 Modbus TCP available at 9.6, 19.2 and 38.4 kbauds for configuration or legacy integration. The drive includes safe torque off and short-circuit protection on the output voltage, and overload protection. Natural convection cooling means no fan — quieter operation and one less failure point.

Applications

Lexium integrated drives of this class are used in compact motion axes — pick-and-place stations, labelling machines, small conveyors, and gantry positioning where panel space is tight and a separate drive would not fit. The IP41 rating allows installation in dry, dust-controlled environments typical of light industrial machinery.

The ILS2E573PB1A0 is a mid-torque integrated stepper drive in the Lexium range, with EtherCAT connectivity and a compact footprint.

MPN
ILS2E573PB1A0