Skip to main content
Log in
Schneider Electric ILS2E851PC1A0

Schneider ILS2E851PC1A0 Lexium integrated drive, 6-pole stepper, 48 V, EtherCAT

MPNILS2E851PC1A0
Obsolete

Schneider ILS2E851PC1A0 — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$1,337.00Ref. price · indicative, final on quote
Schneider Electric ILS2E851PC1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS2E851PC1A0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeSafe torque off Overload of output voltage Short circuit of the output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55 V
Discrete output voltage23...25 V

All specifications

ILS2E851PC1A0 additional specifications
ParameterValue
Supply voltage48 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption5000 mA maximum continuous
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceEtherCAT, Integrated
Mounting supportFlange
Mounting holes diameter0.3 in (6.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.9 in (99 mm)
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.08 in (2 mm)
StandardsEN 61800-3:2001, second environment EN/IEC 61800-3 IEC 61800-3, Ed 2 IEC 60072-1 EN 50347 EN/IEC 50178 EN 61800-3 : 2001-02
Length5.5 in (140.6 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWithout
Nominal speed300 rpm 24 V 600 rpm 48 V
Rotor inertia1.1 kg.cm²
Accuracy error+/- 6 arc min
Holding torque17.7 lbf.in (2 N.m)
Nominal torque17.7 lbf.in (2 N.m)
Shaft diameter0.5 in (12 mm)
Device short nameILS
Motor flange size3.3 in (85 mm)
Peak stall torque17.7 lbf.in (2 N.m)
Transmission rate100 Mbits
Service life in hours20000 h bearing
Associated fuse rating16 A
Maximum axial force fa170 N tensile force) 30 N force pressure)
Number of motor stacks1
Continuous stall torque17.7 lbf.in (2 N.m)
Maximum radial force fr100 N
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed3000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS2E851PC1A0 is a Schneider Lexium integrated drive combining a 6-pole 3-phase stepper motor with onboard drive electronics, rated for 48 V DC supply and delivering 2 N.m holding torque. It communicates via EtherCAT and carries an IP41 enclosure rating for flange-mount installation. The part remains in active production.

Schneider lists the ILS2E851PC1A0 as an active product with no announced end-of-life. For current lead times and pricing, submit an RFQ; the unit is sourced through standard distribution channels.

MPN
ILS2E851PC1A0