Skip to main content
Log in
Schneider Electric ILS2E853PC1A0

Schneider ILS2E853PC1A0 Lexium Integrated Drive, 6-pole, 24 V DC, EtherCAT

MPNILS2E853PC1A0
Active

Schneider Lexium integrated drive ILS2E853PC1A0, 6-pole 3-phase stepper motor, 24 V DC supply, EtherCAT interface, 6 N.m torque, IP41, flange mounting, CE.

$1,443.00 – $2,600.00Ref. price · indicative, final on quote
Schneider Electric ILS2E853PC1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS2E853PC1A0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeShort circuit of the output voltage Overload of output voltage Safe torque off
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55 V
Discrete output voltage23...25 V

All specifications

ILS2E853PC1A0 additional specifications
ParameterValue
Supply voltage24 V 48 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption5000 mA maximum continuous
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceEtherCAT, Integrated
Mounting supportFlange
Mounting holes diameter0.3 in (6.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.9 in (99 mm)
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.08 in (2 mm)
StandardsIEC 61800-3, Ed 2 EN 50347 EN 61800-3 : 2001-02 EN/IEC 61800-3 EN/IEC 50178 IEC 60072-1 EN 61800-3:2001, second environment
Length7.9 in (200.6 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWithout
Nominal speed100 rpm 24 V 200 rpm 48 V
Rotor inertia3.3 kg.cm²
Accuracy error+/- 6 arc min
Holding torque53.1 lbf.in (6 N.m)
Nominal torque53.1 lbf.in (6 N.m)
Shaft diameter0.6 in (14 mm)
Device short nameILS
Motor flange size3.3 in (85 mm)
Peak stall torque53.1 lbf.in (6 N.m)
Transmission rate100 Mbits
Service life in hours20000 h bearing
Associated fuse rating16 A
Maximum axial force fa170 N tensile force) 30 N force pressure)
Number of motor stacks3
Continuous stall torque53.1 lbf.in (6 N.m)
Maximum radial force fr110 N
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed2000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS2E853PC1A0 is a Schneider Lexium integrated drive combining a 6-pole 3-phase stepper motor and drive electronics in a single housing, order code ILS2E853PC1A0, rated for 24 V DC supply and delivering 6 N.m of holding torque. It communicates via EtherCAT, carries an IP41 rating for in-cabinet use, and mounts via flange to the machine frame. The unit is CE marked and complies with IEC 61800-3 for EMC in the second environment.

The ILS2E853PC1A0 integrates a 6-pole stepper motor and its drive stage into one package, eliminating separate cabling and panel space for a drive module. The 6 N.m holding torque suits direct-drive positioning on indexing tables, pick-and-place axes, and labelers where moderate torque and precise angular positioning are required. Positioning accuracy is rated at +/- 6 arc minutes, and rotor inertia is 3.3 kg.cm², giving the axis predictable response to acceleration commands. The unit accepts 24 V DC supply and communicates over EtherCAT for synchronized multi-axis motion profiles. Feedback is via index pulse, sufficient for homing sequences on incremental systems. The drive includes short-circuit and overload protection on the output voltage, plus Safe Torque Off (STO) for safe stop during maintenance. Shock rating is 150 m/s² over 1000 shocks per EN/IEC 60068-2-29, confirming suitability for machines with intermittent impact loads.

Applications

Lexium integrated drives of this class are used in packaging machinery, assembly stations, textile equipment, and small material-handling axes where space is tight and wiring must be minimized. The EtherCAT interface allows tight synchronization with upstream PLCs and vision systems on high-speed lines.

The ILS2E853PC1A0 carries CE marking and is designed to IEC 61800-3, EN 61800-3, and EN 50347 standards. No official lifecycle status (active/obsolete) is listed in the available documentation; sourcing inquiries should confirm current production status and lead time via RFQ. The unit is not marked as NRND or EOL in the evidence reviewed.

MPN
ILS2E853PC1A0