Skip to main content
Log in
Schneider Electric ILS2E853TC1F0

Schneider ILS2E853TC1F0 Lexium integrated drive, 48 V, EtherCAT, 6 poles

MPNILS2E853TC1F0
Obsolete

Schneider ILS2E853TC1F0 — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$2,420.00Ref. price · indicative, final on quote
Schneider Electric ILS2E853TC1F0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS2E853TC1F0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeHigh speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeShort circuit of the output voltage Overload of output voltage Safe torque off
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55 V
Discrete output voltage23...25 V

All specifications

ILS2E853TC1F0 additional specifications
ParameterValue
Supply voltage48 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption6000 mA maximum continuous
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Brake pull-in power22 W
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceEtherCAT, Integrated
Mounting supportFlange
Mounting holes diameter0.3 in (6.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.9 in (99 mm)
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.08 in (2 mm)
StandardsEN 50347 EN 61800-3 : 2001-02 EN/IEC 50178 EN/IEC 61800-3 IEC 60072-1 IEC 61800-3, Ed 2 EN 61800-3:2001, second environment
Length9.7 in (247.3 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWith
Nominal speed200 rpm 24 V 400 rpm 48 V
Rotor inertia3.5 kg.cm²
Accuracy error+/- 6 arc min
Holding torque53.1 lbf.in (6 N.m) holding brake 39.8 lbf.in (4.5 N.m)
Nominal torque39.8 lbf.in (4.5 N.m)
Shaft diameter0.6 in (14 mm)
Device short nameILS
Motor flange size3.3 in (85 mm)
Peak stall torque39.8 lbf.in (4.5 N.m)
Transmission rate100 Mbits
Brake release time40 ms
Service life in hours20000 h bearing
Associated fuse rating16 A
Brake application time20 ms
Maximum axial force fa170 N tensile force) 30 N force pressure)
Number of motor stacks3
Continuous stall torque39.8 lbf.in (4.5 N.m)
Maximum radial force fr110 N
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed3000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS2E853TC1F0 is a Schneider Lexium integrated drive combining a 3-phase stepper motor and drive in one package, rated 48 V DC with EtherCAT onboard. It delivers 4.5 N.m torque, carries 6 poles, and includes a holding brake. The unit is IP41-rated and CE marked, with shock tolerance to 150 m/s² per EN/IEC 60068-2-29.

Compliance & protection

The ILS2E853TC1F0 carries CE marking and complies with EN 50347, EN 61800-3 (second environment), EN/IEC 50178, and IEC 60072-1. Protection includes short-circuit and overload protection on the output voltage, plus Safe Torque Off. The shock rating of 150 m/s² over 1000 shocks per EN/IEC 60068-2-29 is specified for the unit.

MPN
ILS2E853TC1F0