Skip to main content
Log in
Schneider Electric ILS2K572PB1A0

Schneider ILS2K572PB1A0 Lexium integrated drive, 0.9 N.m, 48 V, EtherNet/IP

MPNILS2K572PB1A0
Obsolete

Schneider ILS2K572PB1A0 — now discontinued, supplied from remaining surplus and broker stock.

$1,789.00Ref. price · indicative, final on quote
Schneider Electric ILS2K572PB1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS2K572PB1A0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeSafe torque off Short circuit of the output voltage Overload of output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55 V
Discrete output voltage23...25 V

All specifications

ILS2K572PB1A0 additional specifications
ParameterValue
Supply voltage48 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption3500 mA maximum continuous
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceEthernet/IP, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (5.2 mm)
Number of mounting holes4
Circle diameter of the mounting holes2.6 in (66.6 mm)
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.06 in (1.6 mm)
StandardsEN/IEC 50178 EN/IEC 61800-3 EN 61800-3:2001, second environment IEC 61800-3, Ed 2 IEC 60072-1 EN 50347 EN 61800-3 : 2001-02
Length4.6 in (115.9 mm)
MarkingCE
Category18288-LEXIUM INTEGRATED DRIVES II
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.8 in (21 mm)
Holding brakeWithout
Nominal speed1000 rpm 48 V 500 rpm 24 V
Rotor inertia0.22 kg.cm²
Accuracy error+/- 6 arc min
Holding torque8.0 lbf.in (0.9 N.m)
Nominal torque8.0 lbf.in (0.9 N.m)
Shaft diameter0.25 in (6.35 mm)
Device short nameILS
Motor flange size2.2 in (57 mm)
Peak stall torque8.0 lbf.in (0.9 N.m)
Transmission rate125, 250, 500 kbauds
Service life in hours20000 h bearing
Associated fuse rating16 A
Maximum axial force fa100 N tensile force) 8.4 N force pressure)
Number of motor stacks2
Continuous stall torque8.0 lbf.in (0.9 N.m)
Maximum radial force fr24 N
Centring collar diameter1.5 in (38.1 mm)
Maximum mechanical speed3000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS2K572PB1A0 is a Schneider Lexium integrated drive combining a 3-phase stepper motor and drive in a single 57 mm frame, delivering 0.9 N.m of torque at 48 V DC and 3.5 A, with EtherNet/IP onboard. Rated IP41 with natural convection cooling, it carries CE marking and complies with EN/IEC 61800-3 for second-environment EMC; the 6-pole winding targets medium-speed, medium-torque positioning duty.

Compared to the BRS368H131ACA, the ILS2K572PB1A0 runs on a higher 48 V supply (vs 34 V) but delivers lower torque at 0.9 N.m vs 1.5 N.m, and its top speed is 1000 rpm at 48 V vs 3000 rpm, making it better suited for compact, lower-speed positioning axes where the integrated form factor saves panel space.

MPN
ILS2K572PB1A0