Skip to main content
Log in
Schneider Electric ILS2K573PC1A0

Schneider ILS2K573PC1A0 Lexium Integrated Drive, 6-pole, 24 V DC, IP41

MPNILS2K573PC1A0
Obsolete

Schneider Lexium integrated drive ILS2K573PC1A0, 3-phase stepper motor, 6 poles, single phase supply, 24 V DC, 150 m/s² shock rating, IP41, Ethernet/IP, RS485 Modbus TCP, flange mount, CE.

$1,337.00 – $2,315.00Ref. price · indicative, final on quote
Schneider Electric ILS2K573PC1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS2K573PC1A0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeOverload of output voltage Safe torque off Short circuit of the output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55 V
Discrete output voltage23...25 V

All specifications

ILS2K573PC1A0 additional specifications
ParameterValue
Supply voltage24 V 48 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption3500 mA maximum continuous
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceEthernet/IP, Integrated
Mounting supportFlange
Mounting holes diameter0.2 in (5.2 mm)
Number of mounting holes4
Circle diameter of the mounting holes2.6 in (66.6 mm)
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6
Centring collar depth0.06 in (1.6 mm)
StandardsIEC 50178 EN 61800-3 : 2001-02 IEC 50347 EN 61800-3:2001, second environment IEC 61800-3 IEC 60072-1 IEC 61800-3, Ed 2
Length5.5 in (138.9 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length0.8 in (21 mm)
Holding brakeWithout
Nominal speed300 rpm 24 V 600 rpm 48 V
Rotor inertia0.38 kg.cm²
Accuracy error+/- 6 arc min
Holding torque13.3 lbf.in (1.5 N.m)
Nominal torque13.3 lbf.in (1.5 N.m)
Shaft diameter0.3 in (8 mm)
Device short nameILS
Motor flange size2.2 in (57 mm)
Peak stall torque13.3 lbf.in (1.5 N.m)
Transmission rate125, 250, 500 kbauds
Service life in hours20000 h bearing
Associated fuse rating16 A
Maximum axial force fa100 N tensile force) 8.4 N force pressure)
Number of motor stacks3
Continuous stall torque13.3 lbf.in (1.5 N.m)
Maximum radial force fr50 N
Centring collar diameter1.5 in (38.1 mm)
Maximum mechanical speed3000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

It carries 6 poles, runs on a 24 V DC single-phase supply, and is rated IP41 for in-cabinet use. The drive is CE marked and built to withstand 150 m/s² shock per IEC 60068-2-29, making it suitable for applications with moderate vibration and impact loads.

This integrated drive operates as a closed-loop stepper system with index pulse feedback, delivering a holding torque of 1.5 N·m and a positional accuracy of ±6 arc minutes. The rotor inertia is 0.38 kg·cm², which influences acceleration and settling time in point-to-point moves. Communication is handled via Ethernet/IP and RS485 Modbus TCP at selectable baud rates of 9.6, 19.2, and 38.4 kbaud. The drive includes four multifunction I/O signals configurable as inputs or outputs, plus a safe torque off (STO) protection circuit for emergency stops.

Applications

Lexium integrated drives of this class are used in packaging, labeling, pick-and-place, and small conveyor systems where space is tight and a separate drive-and-motor pair would be too bulky. The IP41 rating limits it to clean, dry cabinets — not washdown or outdoor environments.

Within the Lexium integrated drive range, the ILS2K573PC1A0 sits as a medium-speed, medium-torque variant (winding type: medium speed and torque). It targets OEMs and machine builders who need a single-cable, Ethernet-connected motion axis without a separate controller cabinet.

Pricing & sourcing

The ILS2K573PC1A0 is a current-production Lexium drive, normally sourced to order. Confirm current lead time and minimum order on the quote.

MPN
ILS2K573PC1A0