Skip to main content
Log in
Schneider Electric ILS2K852PC1F0

Schneider ILS2K852PC1F0 Lexium Integrated Drive, 48 V, 6-pole stepper

MPNILS2K852PC1F0
Obsolete

Schneider ILS2K852PC1F0 Square D 75R 1P T1 20K Spd — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$2,434.00 – $3,305.00Ref. price · indicative, final on quote
Schneider Electric ILS2K852PC1F0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS2K852PC1F0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeShort circuit of the output voltage Safe torque off Overload of output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55 V
Discrete output voltage23...25 V

All specifications

ILS2K852PC1F0 additional specifications
ParameterValue
Supply voltage48 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption5000 mA maximum continuous
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Brake pull-in power22 W
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to IEC 60034-5 IP54 total except shaft bushing: conforming to IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceEthernet/IP, Integrated
Mounting supportFlange
Mounting holes diameter0.3 in (6.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.9 in (99 mm)
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles IEC 60068-2-6
Centring collar depth0.08 in (2 mm)
StandardsIEC 50347 EN 61800-3:2001, second environment EN 61800-3 : 2001-02 IEC 61800-3 IEC 61800-3, Ed 2 IEC 50178 IEC 60072-1
Length8.6 in (217.3 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWith
Nominal speed180 rpm 24 V 360 rpm 48 V
Rotor inertia2.4 kg.cm²
Accuracy error+/- 6 arc min
Holding torque53.1 lbf.in (6 N.m) holding brake 35.4 lbf.in (4 N.m)
Nominal torque35.4 lbf.in (4 N.m)
Shaft diameter0.5 in (12 mm)
Device short nameILS
Motor flange size3.3 in (85 mm)
Peak stall torque35.4 lbf.in (4 N.m)
Transmission rate125, 250, 500 kbauds
Brake release time40 ms
Service life in hours20000 h bearing
Associated fuse rating16 A
Brake application time20 ms
Maximum axial force fa170 N tensile force) 30 N force pressure)
Number of motor stacks2
Continuous stall torque35.4 lbf.in (4 N.m)
Maximum radial force fr100 N
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed3000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS2K852PC1F0 is a Schneider Electric Lexium integrated drive combining a 3-phase stepper motor and drive electronics in a single housing, order code ILS2K852PC1F0, rated for 48 V DC supply with 6 poles and a holding brake. It carries an IP41 rating for protected indoor installation, mounts via flange, and is CE marked per IEC 61800-3 and IEC 50178.

This integrated drive houses a 3-phase stepper motor and its control electronics in one package, simplifying wiring and panel layout. The 6-pole motor delivers a holding torque of 35.4 lbf.in (4 N·m) and positional accuracy of ±6 arc min, with a rotor inertia of 2.4 kg·cm². Communication is via Ethernet/IP and RS485 Modbus TCP at 9.6, 19.2, and 38.4 kbaud, allowing direct connection to a PLC or motion controller without an external drive module. The holding brake holds the load in position when power is removed, and protection includes short-circuit, overload, and safe torque off.

Applications

Lexium integrated drives of this class are used in packaging, labeling, pick-and-place, and assembly machines where a compact, single-cable motion axis is needed. The integrated design reduces cabinet space and wiring compared to a separate drive and motor pair.

Within Schneider's Lexium integrated drive range, the ILS2K852PC1F0 sits as a 48 V DC, 6-pole stepper variant with Ethernet/IP, aimed at OEMs and machine builders who want a pre-matched motor-drive combination for distributed motion control.

The ILS2K852PC1F0 carries CE marking and is designed to IEC 61800-3 (second environment) and IEC 50178. It meets shock tolerance of 150 m/s² for 1000 shocks per IEC 60068-2-29.

MPN
ILS2K852PC1F0