Overview
The ILS2K853TC1F0 is a Schneider Lexium integrated drive combining a 3-phase stepper motor and drive electronics in one package, order code ILS2K853TC1F0. It delivers 4.5 Nm of holding torque from a 6-pole motor, runs on a 24 V DC supply, and carries an IP41 rating for cabinet-mount applications. On-board Ethernet/IP and RS485 Modbus TCP communication eliminate the need for a separate motion controller in many point-to-point indexing and positioning tasks.
The integrated drive accepts step/direction or fieldbus commands and closes the position loop using an index pulse feedback. The 4.5 Nm torque rating defines the maximum holding torque available at standstill; the drive can sustain 200 rpm at 24 V and 400 rpm at 48 V, making it suited for moderate-speed indexing rather than high-speed continuous rotation. Position accuracy is specified at +/- 6 arc minutes, which corresponds to roughly 20000 points per turn resolution — adequate for pick-and-place, labelling, and light assembly axes where sub-degree repeatability is required. The rotor inertia of 3.5 kg.cm² influences acceleration and settling time; a higher-inertia load will require longer move profiles. Protection circuits cover overload, short circuit of the output voltage, and Safe Torque Off, allowing the drive to be integrated into safety-rated stop circuits without an external contactor.
Applications
Lexium integrated drives of this class are specified in packaging machinery, small assembly stations, labelling systems, and medical device handling equipment where a compact motor-drive combination saves panel space and reduces wiring compared to a separate drive and motor.
The ILS2K853TC1F0 carries CE marking and is designed to EN/IEC 61800-3 (second environment) and EN/IEC 50178, EN 50347, and IEC 60072-1 standards. No official lifecycle status (active, NRND, or discontinued) is listed in the available documentation; an RFQ is the recommended path to confirm current production status and lead time.